UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 531

Sortiert nach

Size dependence of microstructure of AlSi10Mg alloy fabricated by selective laser melting

Materials characterization, 2018-09, Vol.143, p.18-26

2018

Link zum Volltext

Verfügbarkeit prüfen

Microstructural characterization of cellular AlSi10Mg alloy fabricated by selective laser melting

Materials & design, 2018-11, Vol.157, p.478-491

2018

Link zum Volltext

Verfügbarkeit prüfen

Fast scanning calorimetry study of Al alloy powder for understanding microstructural development in laser powder bed fusion

Materials & design, 2022-07, Vol.219, p.110830, Article 110830

2022

Link zum Volltext

Verfügbarkeit prüfen

Microstructural origin of anisotropic tensile ductility of Al-Si alloy manufactured by laser powder bed fusion

Scripta materialia, 2023-03, Vol.226, p.115259, Article 115259

2023

Link zum Volltext

Verfügbarkeit prüfen

High-temperature strength sustained by nano-sized eutectic structure of Al–Fe alloy manufactured by laser powder bed fusion

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2022-03, Vol.838, p.142782, Article 142782

2022

Link zum Volltext

Verfügbarkeit prüfen

Understanding and suppressing shear band formation in strut-based lattice structures manufactured by laser powder bed fusion

Materials & design, 2021-02, Vol.199, p.109416, Article 109416

2021

Link zum Volltext

Verfügbarkeit prüfen

Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion

Intermetallics, 2020-10, Vol.125, p.106892, Article 106892

2020

Link zum Volltext

Verfügbarkeit prüfen

Managing both high strength and thermal conductivity of a laser powder bed fused Al–2.5Fe binary alloy: Effect of annealing on microstructure

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2021-02, Vol.805, p.140591, Article 140591

2021

Link zum Volltext

Verfügbarkeit prüfen

Design of heat-resistant Al–Mg –Zn–Cu–Ni quinary alloy: Controlling intermetallic phases and mechanical performance at elevated temperature

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2022-11, Vol.857, p.144055, Article 144055

2022

Link zum Volltext

Verfügbarkeit prüfen

Microstructure of intermetallic-reinforced Al-Based alloy composites fabricated using eutectic reactions in Al–Mg–Zn ternary system

Intermetallics, 2018-04, Vol.95, p.48-58

2018

Link zum Volltext

Verfügbarkeit prüfen

Controlling WC/Co two-phase microstructure of cemented carbides additive-manufactured by laser powder bed fusion: Effect of powder composition and post heat-treatment

Materials & design, 2021-11, Vol.210, p.110034, Article 110034

2021

Link zum Volltext

Verfügbarkeit prüfen

Effect of solute Ni on thermal activation process of plastic deformation in Fe–18Cr single-crystal micropillars

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2022-11, Vol.857, p.144076, Article 144076

2022

Link zum Volltext

Verfügbarkeit prüfen

Dual plateau stress of C15-type topologically close-packed lattice structures additive-manufactured by laser powder bed fusion

Scripta materialia, 2021-09, Vol.202, p.114003, Article 114003

2021

Link zum Volltext

Verfügbarkeit prüfen

Negative strain rate sensitivity of yield strength of Al-Si alloy additive-manufactured using laser powder bed fusion

Scripta materialia, 2022-05, Vol.213, p.114635, Article 114635

2022

Link zum Volltext

Verfügbarkeit prüfen

Development of gradient microstructure in the lattice structure of AlSi10Mg alloy fabricated by selective laser melting

Journal of materials science & technology, 2020-01, Vol.36, p.106-117

2020

Link zum Volltext

Verfügbarkeit prüfen

Influence of Stabilizing Elements on Ductile-Brittle Transition Temperature (DBTT) of 18Cr Ferritic Stainless Steels

ISIJ International, 2022/04/15, Vol.62(4), pp.788-798

2022

Link zum Volltext

Verfügbarkeit prüfen

Change in microstructural characteristics of laser powder bed fused Al–Fe binary alloy at elevated temperature

Journal of materials science & technology, 2022-01, Vol.97, p.38-53

2022

Link zum Volltext

Verfügbarkeit prüfen

Joint strength of Fe/epoxy resin hybrid structure via porous Fe/TiB2 composite layer synthesized by in-situ reaction process

Journal of materials processing technology, 2021-02, Vol.288, p.116843, Article 116843

2021

Link zum Volltext

Verfügbarkeit prüfen

Effect of Heat Treatment on Gradient Microstructure of AlSi10Mg Lattice Structure Manufactured by Laser Powder Bed Fusion

Materials, 2020-05, Vol.13 (11), p.2487

2020

Link zum Volltext

Verfügbarkeit prüfen

Effect of layer thickness on bonding strength of Al/epoxy resin joints via interpenetrating phase layer

Journal of materials processing technology, 2018-04, Vol.254, p.338-345

2018

Link zum Volltext

Verfügbarkeit prüfen

Enhancing the solid-state joinability of A5052 and CFRTP via an additively manufactured micro-structure

Journal of materials processing technology, 2022-08, Vol.306, p.117629, Article 117629

2022

Link zum Volltext

Verfügbarkeit prüfen

Crystallography of Fe2Al5 phase at the interface between solid Fe and liquid Al

Intermetallics, 2015-12, Vol.67, p.1-11

2015

Link zum Volltext

Verfügbarkeit prüfen

Anomalous size-dependent strength in micropillar compression deformation of commercial-purity aluminum single-crystals

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2020-01, Vol.772, p.138710, Article 138710

2020

Link zum Volltext

Verfügbarkeit prüfen

Structural design and bonding strength evaluation of Al/epoxy resin joint via interpenetrating phase layer

Journal of materials processing technology, 2018-12, Vol.262, p.11-18

2018

Link zum Volltext

Verfügbarkeit prüfen

Formation of xylem tissues and secondary cell walls is diminished by severe and consecutive insect defoliation

American journal of botany, 2023-10, Vol.110 (10), p.1-e16232

2023

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 531

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(410)
Mit Volltextzugriff
(505)

Publikationsform

Sprache

Englisch
(447)
Japanisch
(268)
Russisch
(2)

Erscheinungsjahr

n.n

Thema

Science & Technology
(296)
Technology
(135)
Life Sciences & Biomedicine
(127)
Materials Science
(106)
Materials Science, Multidisciplinary
(95)
Humans
(89)
Physical Sciences
(68)
Metallurgy & Metallurgical Engineering
(67)
Male
(52)
Microstructure
(52)
Additive Manufacturing
(49)
Female
(47)
Science & Technology - Other Topics
(42)
Aged
(39)
General Materials Science
(39)
Mechanical Engineering
(38)
Mechanics Of Materials
(36)
Engineering
(33)
Nanoscience & Nanotechnology
(32)
Middle Aged
(31)

15 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

... seit 30 Tagen
(2)
... seit 90 Tagen
(9)

Menü

Weitere Dienste

Einstellungen

Size dependence of microstructure of AlSi10Mg alloy fabricated by selective laser melting

Microstructural characterization of cellular AlSi10Mg alloy fabricated by selective laser melting

Fast scanning calorimetry study of Al alloy powder for understanding microstructural development in laser powder bed fusion

Microstructural origin of anisotropic tensile ductility of Al-Si alloy manufactured by laser powder bed fusion

High-temperature strength sustained by nano-sized eutectic structure of Al–Fe alloy manufactured by laser powder bed fusion

Understanding and suppressing shear band formation in strut-based lattice structures manufactured by laser powder bed fusion

Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion

Managing both high strength and thermal conductivity of a laser powder bed fused Al–2.5Fe binary alloy: Effect of annealing on microstructure

Design of heat-resistant Al–Mg –Zn–Cu–Ni quinary alloy: Controlling intermetallic phases and mechanical performance at elevated temperature

Microstructure of intermetallic-reinforced Al-Based alloy composites fabricated using eutectic reactions in Al–Mg–Zn ternary system

Controlling WC/Co two-phase microstructure of cemented carbides additive-manufactured by laser powder bed fusion: Effect of powder composition and post heat-treatment

Effect of solute Ni on thermal activation process of plastic deformation in Fe–18Cr single-crystal micropillars

Dual plateau stress of C15-type topologically close-packed lattice structures additive-manufactured by laser powder bed fusion

Negative strain rate sensitivity of yield strength of Al-Si alloy additive-manufactured using laser powder bed fusion

Development of gradient microstructure in the lattice structure of AlSi10Mg alloy fabricated by selective laser melting

Influence of Stabilizing Elements on Ductile-Brittle Transition Temperature (DBTT) of 18Cr Ferritic Stainless Steels

Change in microstructural characteristics of laser powder bed fused Al–Fe binary alloy at elevated temperature

Joint strength of Fe/epoxy resin hybrid structure via porous Fe/TiB2 composite layer synthesized by in-situ reaction process

Effect of Heat Treatment on Gradient Microstructure of AlSi10Mg Lattice Structure Manufactured by Laser Powder Bed Fusion

Effect of layer thickness on bonding strength of Al/epoxy resin joints via interpenetrating phase layer

Enhancing the solid-state joinability of A5052 and CFRTP via an additively manufactured micro-structure

Crystallography of Fe2Al5 phase at the interface between solid Fe and liquid Al

Anomalous size-dependent strength in micropillar compression deformation of commercial-purity aluminum single-crystals

Structural design and bonding strength evaluation of Al/epoxy resin joint via interpenetrating phase layer

Formation of xylem tissues and secondary cell walls is diminished by severe and consecutive insect defoliation

Suchergebnisse filtern