UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 733

Sortiert nach

Energy-efficient polymeric gas separation membranes for a sustainable future: A review

Polymer (Guilford), 2013-08, Vol.54 (18), p.4729-4761

2013

Link zum Volltext

Verfügbarkeit prüfen

Water permeability and water/salt selectivity tradeoff in polymers for desalination

Journal of membrane science, 2011-03, Vol.369 (1), p.130-138

2011

Link zum Volltext

Verfügbarkeit prüfen

Water purification by membranes: The role of polymer science

Journal of polymer science. Part B, Polymer physics, 2010-08, Vol.48 (15), p.1685-1718

2010

Link zum Volltext

Verfügbarkeit prüfen

Highly Chlorine-Tolerant Polymers for Desalination

Angewandte Chemie (International ed.), 2008-07, Vol.47 (32), p.6019-6024

2008

Link zum Volltext

Verfügbarkeit prüfen

Effect of Free Volume on Water and Salt Transport Properties in Directly Copolymerized Disulfonated Poly(arylene ether sulfone) Random Copolymers

Macromolecules, 2011-06, Vol.44 (11), p.4428-4438

2011

Link zum Volltext

Verfügbarkeit prüfen

Gas permeability, diffusivity, and free volume of thermally rearranged polymers based on 3,3′-dihydroxy-4,4′-diamino-biphenyl (HAB) and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)

Journal of membrane science, 2012-08, Vol.409-410, p.232-241

2012

Link zum Volltext

Verfügbarkeit prüfen

Gas sorption and characterization of thermally rearranged polyimides based on 3,3′-dihydroxy-4,4′-diamino-biphenyl (HAB) and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)

Journal of membrane science, 2012-10, Vol.415-416, p.558-567

2012

Link zum Volltext

Verfügbarkeit prüfen

Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells

Polymer (Guilford), 2008-02, Vol.49 (3), p.715-723

2008

Link zum Volltext

Verfügbarkeit prüfen

Toward Improved Conductivity of Sulfonated Aromatic Proton Exchange Membranes at Low Relative Humidity

Chemistry of materials, 2008-09, Vol.20 (17), p.5636-5642

2008

Link zum Volltext

Verfügbarkeit prüfen

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Conversion and free volume

Polymer (Guilford), 2014-04, Vol.55 (7), p.1636-1647

2014

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and characterization of thermally rearranged (TR) polymers: effect of glass transition temperature of aromatic poly(hydroxyimide) precursors on TR process and gas permeation properties

Journal of materials chemistry. A, Materials for energy and sustainability, 2013-01, Vol.1 (19), p.6063-6072

2013

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and characterization of poly(arylene ether sulfone)-b-polybenzimidazole copolymers for high temperature low humidity proton exchange membrane fuel cells

Polymer (Guilford), 2008-11, Vol.49 (25), p.5387-5396

2008

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and properties of new sulfonated poly( p-phenylene) derivatives for proton exchange membranes. I

Polymer (Guilford), 2004-08, Vol.45 (17), p.5847-5854

2004

Link zum Volltext

Verfügbarkeit prüfen

Effects of block length and solution-casting conditions on the final morphology and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer films for proton exchange membranes

Polymer (Guilford), 2009-11, Vol.50 (25), p.6129-6138

2009

Link zum Volltext

Verfügbarkeit prüfen

Influence of processing history on water and salt transport properties of disulfonated polysulfone random copolymers

Polymer (Guilford), 2012-03, Vol.53 (7), p.1581-1592

2012

Link zum Volltext

Verfügbarkeit prüfen

Controlled Disulfonated Poly(Arylene Ether Sulfone) Multiblock Copolymers for Direct Methanol Fuel Cells

ACS applied materials & interfaces, 2014-04, Vol.6 (8), p.5779-5788

2014

Link zum Volltext

Verfügbarkeit prüfen

State of Water in Disulfonated Poly(arylene ether sulfone) Copolymers and a Perfluorosulfonic Acid Copolymer (Nafion) and Its Effect on Physical and Electrochemical Properties

Macromolecules, 2003-08, Vol.36 (17), p.6281-6285

2003

Link zum Volltext

Verfügbarkeit prüfen

New multiblock copolymers of sulfonated poly(4′-phenyl-2,5-benzophenone) and poly(arylene ether sulfone) for proton exchange membranes. II

Polymer (Guilford), 2004-08, Vol.45 (17), p.5855-5862

2004

Link zum Volltext

Verfügbarkeit prüfen

Fabrication and characterization of heteropolyacid (H 3PW 12O 40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications

Journal of membrane science, 2003-02, Vol.212 (1), p.263-282

2003

Link zum Volltext

Verfügbarkeit prüfen

Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic–hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells

Journal of membrane science, 2009-05, Vol.333 (1), p.1-11

2009

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and characterization of multiblock semi-crystalline hydrophobic poly(ether ether ketone)–hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes

Polymer (Guilford), 2012-07, Vol.53 (15), p.3143-3153

2012

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and crosslinking of partially disulfonated poly(arylene ether sulfone) random copolymers as candidates for chlorine resistant reverse osmosis membranes

Polymer (Guilford), 2008-04, Vol.49 (9), p.2243-2252

2008

Link zum Volltext

Verfügbarkeit prüfen

Disulfonated poly(arylene ether sulfone) random copolymer thin film composite membrane fabricated using a benign solvent for reverse osmosis applications

Journal of membrane science, 2012-02, Vol.389, p.363-371

2012

Link zum Volltext

Verfügbarkeit prüfen

Polyamide interfacial composite membranes prepared from m-phenylene diamine, trimesoyl chloride and a new disulfonated diamine

Journal of membrane science, 2012-06, Vol.403-404, p.152-161

2012

Link zum Volltext

Verfügbarkeit prüfen

Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton-exchange membranes for fuel-cell use above 100 °C

Journal of polymer science. Part B, Polymer physics, 2003-11, Vol.41 (22), p.2816-2828

2003

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 733

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(630)
Mit Volltextzugriff
(654)

Publikationsform

3 weitere anzeigen...

Weniger anzeigen...

Sprache

Englisch
(728)
Japanisch
(141)
Koreanisch
(4)
Deutsch
(1)

Erscheinungsjahr

n.n

Thema

15 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

Menü

Weitere Dienste

Einstellungen

Energy-efficient polymeric gas separation membranes for a sustainable future: A review

Water permeability and water/salt selectivity tradeoff in polymers for desalination

Water purification by membranes: The role of polymer science

Highly Chlorine-Tolerant Polymers for Desalination

Effect of Free Volume on Water and Salt Transport Properties in Directly Copolymerized Disulfonated Poly(arylene ether sulfone) Random Copolymers

Gas permeability, diffusivity, and free volume of thermally rearranged polymers based on 3,3′-dihydroxy-4,4′-diamino-biphenyl (HAB) and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)

Gas sorption and characterization of thermally rearranged polyimides based on 3,3′-dihydroxy-4,4′-diamino-biphenyl (HAB) and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)

Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells

Toward Improved Conductivity of Sulfonated Aromatic Proton Exchange Membranes at Low Relative Humidity

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Conversion and free volume

Synthesis and characterization of thermally rearranged (TR) polymers: effect of glass transition temperature of aromatic poly(hydroxyimide) precursors on TR process and gas permeation properties

Synthesis and characterization of poly(arylene ether sulfone)-b-polybenzimidazole copolymers for high temperature low humidity proton exchange membrane fuel cells

Synthesis and properties of new sulfonated poly( p-phenylene) derivatives for proton exchange membranes. I

Effects of block length and solution-casting conditions on the final morphology and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer films for proton exchange membranes

Influence of processing history on water and salt transport properties of disulfonated polysulfone random copolymers

Controlled Disulfonated Poly(Arylene Ether Sulfone) Multiblock Copolymers for Direct Methanol Fuel Cells

State of Water in Disulfonated Poly(arylene ether sulfone) Copolymers and a Perfluorosulfonic Acid Copolymer (Nafion) and Its Effect on Physical and Electrochemical Properties

New multiblock copolymers of sulfonated poly(4′-phenyl-2,5-benzophenone) and poly(arylene ether sulfone) for proton exchange membranes. II

Fabrication and characterization of heteropolyacid (H 3PW 12O 40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications

Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic–hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells

Synthesis and characterization of multiblock semi-crystalline hydrophobic poly(ether ether ketone)–hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes

Synthesis and crosslinking of partially disulfonated poly(arylene ether sulfone) random copolymers as candidates for chlorine resistant reverse osmosis membranes

Disulfonated poly(arylene ether sulfone) random copolymer thin film composite membrane fabricated using a benign solvent for reverse osmosis applications

Polyamide interfacial composite membranes prepared from m-phenylene diamine, trimesoyl chloride and a new disulfonated diamine

Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton-exchange membranes for fuel-cell use above 100 °C

Suchergebnisse filtern