UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 16.894

Sortiert nach

Handbook On Mechanics Of Inelastic Solids (In 2 Volumes)

Rees, David W A

1, 2023

Link zum Volltext

Verfügbarkeit prüfen

On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter

International journal of mechanical sciences, 2014-03, Vol.80, p.1-15

2014

Link zum Volltext

Verfügbarkeit prüfen

Experimental correlation between bending crack evolution and load-drop criterion in tight-radius three-point bending test with GPa-grade steels

International journal of solids and structures, 2024-09, Vol.301, p.112949, Article 112949

2024

Link zum Volltext

Verfügbarkeit prüfen

The selection mechanism of mineral bridges at the interface of stacked biological materials for a strength-toughness tradeoff

Journal of the mechanics and physics of solids, 2024-10, Vol.191, p.105785, Article 105785

2024

Link zum Volltext

Verfügbarkeit prüfen

A Cavity-Based Micromechanical Model for the Shear-Band Failure in Metallic Glasses Under Arbitrary Stress States

Journal of applied mechanics, 2023-12, Vol.90 (12)

Gao, Yanfei

2023

Link zum Volltext

Verfügbarkeit prüfen

Accuracy of models of confined concrete in rectangular columns using different proposals for the prediction of failure of the FRP

Procedia Structural Integrity, 2022, Vol.42, p.1074-1081

2022

Link zum Volltext

Verfügbarkeit prüfen

Ductile failure of aluminum alloy tubes under combined torsion and tension

International journal of solids and structures, 2016-10, Vol.97-98, p.116-128

2016

Link zum Volltext

Verfügbarkeit prüfen

Fundamental differences between plane strain bending and far-field plane strain tension in ductile plate failure

Journal of the mechanics and physics of solids, 2020-08, Vol.141, p.103960, Article 103960

2020

Link zum Volltext

Verfügbarkeit prüfen

Fatigue failure criterion of materials with static constitutive curve as the limit value

Engineering fracture mechanics, 2023-09, Vol.289, p.109451, Article 109451

2023

Link zum Volltext

Verfügbarkeit prüfen

On shear failure behaviors of an armor steel over a large range of strain rates

International journal of impact engineering, 2018-08, Vol.118, p.24-38

2018

Link zum Volltext

Verfügbarkeit prüfen

Effect of curing and compaction on volumetric and mechanical properties of cold-recycled mixture with asphalt emulsion under different cement contents

Construction & building materials, 2021-08, Vol.297, p.123699, Article 123699

2021

Link zum Volltext

Verfügbarkeit prüfen

Influences of stress triaxiality and local fiber orientation on the failure strain for injection-molded carbon fiber reinforced polyamide-6

Engineering fracture mechanics, 2021-06, Vol.250, p.107784, Article 107784

2021

Link zum Volltext

Verfügbarkeit prüfen

Material similarity law of blunt projectiles penetrating scaled steel target plates

International journal of impact engineering, 2023-08, Vol.178, p.104603, Article 104603

2023

Link zum Volltext

Verfügbarkeit prüfen

The effects of initial static deviatoric stress on liquefaction and pre-failure deformation characteristics of saturated sand under cyclic loading

Soil dynamics and earthquake engineering (1984), 2021-10, Vol.149, p.106870, Article 106870

2021

Link zum Volltext

Verfügbarkeit prüfen

On the reduced damage tolerance of fine-grained nuclear graphite at elevated temperatures using in situ 4D tomographic imaging

Carbon (New York), 2024-03, Vol.222 (C), p.118924, Article 118924

2024

Link zum Volltext

Verfügbarkeit prüfen

Improved strength and ductility of friction stir tailor-welded blanks of base metal AA2024 reinforced with interlayer strip of AA7075

Results in physics, 2020-03, Vol.16, p.102911, Article 102911

2020

Link zum Volltext

Verfügbarkeit prüfen

The effect of film thickness on the failure strain of polymer-supported metal films

Acta materialia, 2010-03, Vol.58 (5), p.1679-1687

2010

Link zum Volltext

Verfügbarkeit prüfen

Fabrication and mechanical properties of tungsten alloys reinforced with c-ZrO2 particles

Journal of alloys and compounds, 2018-11, Vol.769, p.694-705

2018

Link zum Volltext

Verfügbarkeit prüfen

Experimental and numerical investigation on the dynamic response and damage of large-scale multi-box structure under internal blast loading

Thin-walled structures, 2023-02, Vol.183, p.110430, Article 110430

2023

Link zum Volltext

Verfügbarkeit prüfen

Investigation on three-dimensional failure criterion of asphalt mixture considering the effect of stiffness

Construction & building materials, 2021-05, Vol.285, p.122431, Article 122431

2021

Link zum Volltext

Verfügbarkeit prüfen

Interfacial properties of high failure strain polyimide fiber/epoxy composites analyzed by a modified single fiber fragmentation test

Applied surface science, 2020-05, Vol.513, p.145869, Article 145869

2020

Link zum Volltext

Verfügbarkeit prüfen

Influence of free water on compressive fatigue properties of ECC

International journal of fatigue, 2024-04, Vol.181, p.108112, Article 108112

2024

Link zum Volltext

Verfügbarkeit prüfen

Microstructure and mechanical properties of W-ZrO2 alloys by different preparation techniques

Journal of alloys and compounds, 2019-02, Vol.774, p.210-221

2019

Link zum Volltext

Verfügbarkeit prüfen

Experimental and numerical plastic response and failure of pre-notched transversely impacted beams

International journal of mechanical sciences, 2013-12, Vol.77, p.314-332

2013

Link zum Volltext

Verfügbarkeit prüfen

Effect of different parameters on the tensile properties of printed Polylactic acid samples by FDM: experimental design tested with MDs simulation

International journal of advanced manufacturing technology, 2022, Vol.118 (1-2), p.103-118

2022

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 16.894

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(14.815)
Mit Volltextzugriff
(15.483)

Publikationsform

4 weitere anzeigen...

Weniger anzeigen...

Sprache

12 weitere anzeigen...

Weniger anzeigen...

Erscheinungsjahr

n.n

Thema

Science & Technology
(14.240)
Technology
(9.588)
Engineering
(6.228)
Materials Science
(5.256)
Strain
(5.234)
Physical Sciences
(3.919)
Materials Science, Multidisciplinary
(3.790)
Life Sciences & Biomedicine
(3.627)
Mechanical Properties
(3.267)
Failure
(3.151)
Deformation
(2.684)
Mathematical Models
(2.678)
Fatigue Failure
(2.599)
Crack Propagation
(2.374)
Animals
(2.322)
Mechanics
(2.295)
Male
(2.077)
Fracture Mechanics
(2.028)
Physics
(1.983)
Failure Modes
(1.855)

15 weitere anzeigen...

Weniger anzeigen...

Kollektion

Ingenta
(9.080)
EZB Electronic Journals Library
(5.938)
Elsevier ScienceDirect Journals
(4.265)
IngentaConnect Journals
(3.888)
MEDLINE
(3.623)
springer (창간호~2014)
(3.104)
SpringerLINK Contemporary (Konsortium Baden-Württemberg)
(2.383)
Journals@Ovid Full Text
(2.244)
Wiley Online Library
(1.524)
Elsevier Journal Backfiles on ScienceDirect (DFG Nationallizenzen)
(1.309)
Wiley Online Library Full Collection 2018
(1.235)
Single Journals
(927)
IEEE Xplore
(574)
SAGE Complete
(441)
Taylor & Francis Journals Auto-Holdings Collection
(416)
Taylor & Francis Journals Complete
(406)
Taylor & Francis Current Content Access
(380)
ProQuest Dissertations & Theses A&I
(286)
Ebook Central Perpetual and DDA
(256)
Oxford journals
(253)

15 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

Menü

Weitere Dienste

Einstellungen

Handbook On Mechanics Of Inelastic Solids (In 2 Volumes)

On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter

Experimental correlation between bending crack evolution and load-drop criterion in tight-radius three-point bending test with GPa-grade steels

The selection mechanism of mineral bridges at the interface of stacked biological materials for a strength-toughness tradeoff

A Cavity-Based Micromechanical Model for the Shear-Band Failure in Metallic Glasses Under Arbitrary Stress States

Accuracy of models of confined concrete in rectangular columns using different proposals for the prediction of failure of the FRP

Ductile failure of aluminum alloy tubes under combined torsion and tension

Fundamental differences between plane strain bending and far-field plane strain tension in ductile plate failure

Fatigue failure criterion of materials with static constitutive curve as the limit value

On shear failure behaviors of an armor steel over a large range of strain rates

Effect of curing and compaction on volumetric and mechanical properties of cold-recycled mixture with asphalt emulsion under different cement contents

Influences of stress triaxiality and local fiber orientation on the failure strain for injection-molded carbon fiber reinforced polyamide-6

Material similarity law of blunt projectiles penetrating scaled steel target plates

The effects of initial static deviatoric stress on liquefaction and pre-failure deformation characteristics of saturated sand under cyclic loading

On the reduced damage tolerance of fine-grained nuclear graphite at elevated temperatures using in situ 4D tomographic imaging

Improved strength and ductility of friction stir tailor-welded blanks of base metal AA2024 reinforced with interlayer strip of AA7075

The effect of film thickness on the failure strain of polymer-supported metal films

Fabrication and mechanical properties of tungsten alloys reinforced with c-ZrO2 particles

Experimental and numerical investigation on the dynamic response and damage of large-scale multi-box structure under internal blast loading

Investigation on three-dimensional failure criterion of asphalt mixture considering the effect of stiffness

Interfacial properties of high failure strain polyimide fiber/epoxy composites analyzed by a modified single fiber fragmentation test

Influence of free water on compressive fatigue properties of ECC

Microstructure and mechanical properties of W-ZrO2 alloys by different preparation techniques

Experimental and numerical plastic response and failure of pre-notched transversely impacted beams

Effect of different parameters on the tensile properties of printed Polylactic acid samples by FDM: experimental design tested with MDs simulation

Suchergebnisse filtern