Sie befinden Sich nicht im Netzwerk der Universität Paderborn. Der Zugriff auf elektronische Ressourcen ist gegebenenfalls nur via VPN oder Shibboleth (DFN-AAI) möglich. mehr Informationen...
This paper describes the development of a six-axis force/moment sensor and its control system for an intelligent robot's gripper. An intelligent robot's gripper should detect the forces F[x (x-direction force), F[y, and F[z in the gripping direction and in the gravitational direction, and be controlled by the measured forces and the gripper's control system to safely grasp an unknown object. Also, it should detect the moments M[x (x-direction moment), M[y, and M[z to accurately perceive the position of the object in the grippers. Therefore, an intelligent robot's gripper should be composed of a six-axis force/moment sensor which can measure the forces F[x, F[y, and F[z, and the moments M[x, M[y, and M[z simultaneously. It is required that each component sensor of the six-axis force/moment sensor generally has the same rated output, and the same capacity (e.g. F[x = F[y, = F[z = 50 N, M[x = M[y = M[z = 5 N m) or different capacity (e.g. F[x = 40 N, F[y = 50 N, F[z = 60 N, M[x = 4 N m, M[y = 3 N m, M[z = 5 N m) in each force component and moment component in the gripper, depending on the particular application. The control system should have a fast processing speed for measuring the signals of the sensors and controlling the gripper without much delay time, and should be of small size. The grippers are made with a force sensor which can detect force in only one direction. The control system consists of a personal computer and an A/D, D/A converter board. In this paper, a six-axis force/moment sensor using parallel-plate beams is designed and fabricated to make an intelligent robot's gripper; the gripper's control system is designed and manufactured using a digital signal processor.