Details

Autor(en) / Beteiligte

• Dzienniak, Damian

Titel

The Influence of the Material Type and the Placement in the Print Chamber on the Roughness of MJF-Printed 3D Objects

Ist Teil von

• Machines (Basel), 2022-01, Vol.10 (1), p.49

Ort / Verlag

Basel: MDPI AG

Erscheinungsjahr

2022

Link zum Volltext

Quelle

EZB Electronic Journals Library

Beschreibungen/Notizen

• This paper describes a surface-roughness study performed on samples manufactured additively using the Multi Jet Fusion (MJF) technology. The samples were divided into three groups based on the material used in the process: polypropylene (PP), thermoplastic polyurethane (TPU), and polyamide 11 (PA11). Subsequently, they were tested by means of a roughness-measuring system, which made it possible to determine the typical surface roughness parameters (Ra, Rq, Rz). The tests were designed to examine whether the placement and orientation of 3D objects while printing, in connection with the material used, can significantly influence the surface quality of MJF-printed objects. The results show that the TPU samples have a surface roughness much higher than the PP and PA11 ones, which exhibit roughness levels very similar to each other. It can also be concluded that surfaces printed vertically (along the Z-axis) tend to be less smooth—similarly to the surfaces of objects made of TPU located in the central zones of the print chamber during printing. This information may be of value in cases where low surface roughness is preferred (e.g., manufacturing patient-specific orthoses), although this particular study does not focus on one specific application.