UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 46

Sortiert nach

Corrosion Resistance of Fe-Based Amorphous Films Prepared by the Radio Frequency Magnetron Sputter Method

Materials, 2024-05, Vol.17 (9), p.2071

2024

Volltextzugriff (PDF)

Effects of Micro-Shot Peening on the Stress Corrosion Cracking of Austenitic Stainless Steel Welds

Metals (Basel ), 2023-01, Vol.13 (1), p.69

2023

Volltextzugriff (PDF)

The Effect of Heat Treatment on the Corrosion Resistance of Fe-Based Amorphous Alloy Coating Prepared by High Velocity Oxygen Fuel Method

Materials, 2021-12, Vol.14 (24), p.7818

2021

Volltextzugriff (PDF)

Liquation Cracking in the Heat-Affected Zone of IN738 Superalloy Weld

Metals (Basel ), 2018-06, Vol.8 (6), p.387

2018

Volltextzugriff (PDF)

Dissimilar Brazing of Ti–15Mo–5Zr–3Al and Commercially Pure Titanium Using Ti–Cu–Ni Foil

Materials, 2021-10, Vol.14 (20), p.5949

2021

Volltextzugriff (PDF)

Vacuum Brazing of Metallized YSZ and Crofer Alloy Using 72Ag-28Cu Filler Foil

Materials, 2022-01, Vol.15 (3), p.939

2022

Volltextzugriff (PDF)

The Corrosion and Wear-Corrosion of the Iron-Base Amorphous Coating Prepared by the HVOF Spraying

Metals (Basel ), 2023-06, Vol.13 (6), p.1137

2023

Volltextzugriff (PDF)

Mitigating Stress Corrosion Cracking of 304L and 316L Laser Welds in a Salt Spray through Micro-Shot Peening

Metals (Basel ), 2023-11, Vol.13 (11), p.1898

2023

Volltextzugriff (PDF)

Stress Corrosion Cracking Susceptibility of 304L Substrate and 308L Weld Metal Exposed to a Salt Spray

Materials, 2017-02, Vol.10 (2), p.187

2017

Volltextzugriff (PDF)

Creep Rupture of the Simulated HAZ of T92 Steel Compared to that of a T91 Steel

Materials, 2017-02, Vol.10 (2), p.139

2017

Volltextzugriff (PDF)

Microstructural Evolution of 9CrMoW Weld Metal in a Multiple-Pass Weld

Metals (Basel ), 2021-06, Vol.11 (6), p.847

2021

Volltextzugriff (PDF)

Effects of Thermal Simulation on the Creep Fracture of the Mod. 9Cr-1Mo Weld Metal

Metals (Basel ), 2020-09, Vol.10 (9), p.1181

2020

Volltextzugriff (PDF)

Vacuum Brazing Ti–15–3 with a TiNiNb Braze Alloy

Metals (Basel ), 2019-10, Vol.9 (10), p.1085

2019

Volltextzugriff (PDF)

Microstructural Evolution and Short-Term Creep Rupture of the Simulated HAZ in T92 Steel Normalized at Different Temperatures

Metals (Basel ), 2019-12, Vol.9 (12), p.1310

2019

Volltextzugriff (PDF)

Synergetic effects of micro-shot peening and gas nitriding on the fatigue performance of AISI 4140 steel

Surface & coatings technology, 2024-06, Vol.485, p.130856, Article 130856

2024

Volltextzugriff (PDF)

Correlation between Fatigue Crack Growth Behavior and Fracture Surface Roughness on Cold-Rolled Austenitic Stainless Steels in Gaseous Hydrogen

Metals (Basel ), 2018-04, Vol.8 (4), p.221

2018

Volltextzugriff (PDF)

Phase Transformation of a Ti-15Mo-5Zr-3Al Brazed Joint Using Clad Ti-15Cu-15Ni Filler

Metals (Basel ), 2020-01, Vol.10 (1), p.83

2020

Volltextzugriff (PDF)

Effect of Low-Temperature Sensitization on Hydrogen Embrittlement of 301 Stainless Steel

Metals (Basel ), 2017-02, Vol.7 (2), p.58-58

2017

Volltextzugriff (PDF)

Effects of Grain Boundary Microconstituents on Heat-Affected Zone Cracks in a Mar-M004 Weldment

Metals (Basel ), 2018-04, Vol.8 (4), p.201

2018

Volltextzugriff (PDF)

The Evolution of Cast Microstructures on the HAZ Liquation Cracking of Mar-M004 Weld

Metals (Basel ), 2018-01, Vol.8 (1), p.35

2018

Volltextzugriff (PDF)

The Comparison of Cracking Susceptibility of IN52M and IN52MSS Overlay Welds

Metals (Basel ), 2019-06, Vol.9 (6), p.651

2019

Volltextzugriff (PDF)

The Application of 40Ti-35Ni-25Nb Filler Foil in Brazing Commercially Pure Titanium

Metals (Basel ), 2018-03, Vol.8 (3), p.154

2018

Volltextzugriff (PDF)

The effects of Cr and Ni equivalents on the microstructure and corrosion resistance of austenitic stainless steels fabricated by laser powder bed fusion

Journal of manufacturing processes, 2023-03, Vol.90, p.69-79

2023

Volltextzugriff (PDF)

Effects of Micro-Shot Peening on the Fatigue Strength of Anodized 7075-T6 Alloy

Materials, 2023-01, Vol.16 (3), p.1160

2023

Volltextzugriff (PDF)

The Influence of Microstructures on the Notched Tensile Fracture of Ti–6Al–6V–2Sn Welds at Elevated Temperatures

ISIJ International, 2010/01/15, Vol.50(1), pp.128-132

2010

Volltextzugriff (PDF)

1 – 25 von 46

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(44)
Mit Volltextzugriff
(44)

Publikationsform

Artikel
(43)
Tagungsberichte
(3)

Sprache

Englisch
(46)
Japanisch
(5)

Erscheinungsjahr

n.n

Thema

Science & Technology
(43)
Technology
(42)
Materials Science
(39)
Materials Science, Multidisciplinary
(38)
Metallurgy & Metallurgical Engineering
(29)
Microstructure
(12)
Physics
(12)
Grain Boundaries
(11)
Physical Sciences
(10)
Physics, Applied
(10)
Substrates
(9)
Applied Sciences
(8)
Chemistry
(8)
Chemistry, Physical
(8)
Exact Sciences And Technology
(8)
Intermetallic Compounds
(8)
Physics, Condensed Matter
(8)
Austenitic Stainless Steels
(7)
Corrosion Resistance
(7)
High Temperature
(7)

15 weitere anzeigen...

Weniger anzeigen...

Menü

Weitere Dienste

Einstellungen

Corrosion Resistance of Fe-Based Amorphous Films Prepared by the Radio Frequency Magnetron Sputter Method

Effects of Micro-Shot Peening on the Stress Corrosion Cracking of Austenitic Stainless Steel Welds

The Effect of Heat Treatment on the Corrosion Resistance of Fe-Based Amorphous Alloy Coating Prepared by High Velocity Oxygen Fuel Method

Liquation Cracking in the Heat-Affected Zone of IN738 Superalloy Weld

Dissimilar Brazing of Ti–15Mo–5Zr–3Al and Commercially Pure Titanium Using Ti–Cu–Ni Foil

Vacuum Brazing of Metallized YSZ and Crofer Alloy Using 72Ag-28Cu Filler Foil

The Corrosion and Wear-Corrosion of the Iron-Base Amorphous Coating Prepared by the HVOF Spraying

Mitigating Stress Corrosion Cracking of 304L and 316L Laser Welds in a Salt Spray through Micro-Shot Peening

Stress Corrosion Cracking Susceptibility of 304L Substrate and 308L Weld Metal Exposed to a Salt Spray

Creep Rupture of the Simulated HAZ of T92 Steel Compared to that of a T91 Steel

Microstructural Evolution of 9CrMoW Weld Metal in a Multiple-Pass Weld

Effects of Thermal Simulation on the Creep Fracture of the Mod. 9Cr-1Mo Weld Metal

Vacuum Brazing Ti–15–3 with a TiNiNb Braze Alloy

Microstructural Evolution and Short-Term Creep Rupture of the Simulated HAZ in T92 Steel Normalized at Different Temperatures

Synergetic effects of micro-shot peening and gas nitriding on the fatigue performance of AISI 4140 steel

Correlation between Fatigue Crack Growth Behavior and Fracture Surface Roughness on Cold-Rolled Austenitic Stainless Steels in Gaseous Hydrogen

Phase Transformation of a Ti-15Mo-5Zr-3Al Brazed Joint Using Clad Ti-15Cu-15Ni Filler

Effect of Low-Temperature Sensitization on Hydrogen Embrittlement of 301 Stainless Steel

Effects of Grain Boundary Microconstituents on Heat-Affected Zone Cracks in a Mar-M004 Weldment

The Evolution of Cast Microstructures on the HAZ Liquation Cracking of Mar-M004 Weld

The Comparison of Cracking Susceptibility of IN52M and IN52MSS Overlay Welds

The Application of 40Ti-35Ni-25Nb Filler Foil in Brazing Commercially Pure Titanium

The effects of Cr and Ni equivalents on the microstructure and corrosion resistance of austenitic stainless steels fabricated by laser powder bed fusion

Effects of Micro-Shot Peening on the Fatigue Strength of Anodized 7075-T6 Alloy

The Influence of Microstructures on the Notched Tensile Fracture of Ti–6Al–6V–2Sn Welds at Elevated Temperatures

Suchergebnisse filtern