UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 54

Sortiert nach

Interval partition-based feedrate scheduling with axial drive constraints for five-axis spline toolpaths

International journal of advanced manufacturing technology, 2019-12, Vol.105 (11), p.4701-4714

2019

Link zum Volltext

Verfügbarkeit prüfen

Tool path planning and machining deformation compensation in high-speed milling for difficult-to-machine material thin-walled parts with curved surface

International journal of advanced manufacturing technology, 2016-06, Vol.84 (9-12), p.1757-1767

2016

Link zum Volltext

Verfügbarkeit prüfen

A fully real-time spline interpolation algorithm with axial jerk constraint based on FIR filtering

International journal of advanced manufacturing technology, 2021-04, Vol.113 (7-8), p.1873-1886

2021

Link zum Volltext

Verfügbarkeit prüfen

A method for fast reconstruction of closed section workpiece surface using point clouds

Advances in mechanical engineering, 2024-02, Vol.16 (2)

2024

Link zum Volltext

Verfügbarkeit prüfen

Look-ahead-window-based interval adaptive feedrate scheduling for long five-axis spline toolpaths under axial drive constraints

Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, 2020-11, Vol.234 (13), p.1656-1670

2020

Link zum Volltext

Verfügbarkeit prüfen

Estimation and compensation for continuous-path running trajectory error in high-feed-speed machining

International journal of advanced manufacturing technology, 2017-03, Vol.89 (5-8), p.1495-1508

2017

Link zum Volltext

Verfügbarkeit prüfen

A review of contouring-error reduction method in multi-axis CNC machining

International journal of machine tools & manufacture, 2018-02, Vol.125, p.34-54

2018

Link zum Volltext

Verfügbarkeit prüfen

Real-Time Contour-Error Estimation Methods for Three-Dimensional Free-Form Parametric Curves in Contour-Following Tasks

International journal of precision engineering and manufacturing, 2018-02, Vol.19 (2), p.173-182

2018

Link zum Volltext

Verfügbarkeit prüfen

An optimization method of tool-path parameters for curved surface by construction of cutter location mesh units

International journal of advanced manufacturing technology, 2018, Vol.94 (1-4), p.701-710

2018

Link zum Volltext

Verfügbarkeit prüfen

Stability recognition for high-speed milling of TC4 thin-walled parts with curved surface

International journal of advanced manufacturing technology, 2017-07, Vol.91 (5-8), p.2819-2829

2017

Link zum Volltext

Verfügbarkeit prüfen

Synergistic real-time compensation of tracking and contouring errors for precise parametric curved contour following systems

Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, 2018-10, Vol.232 (19), p.3367-3383

2018

Link zum Volltext

Verfügbarkeit prüfen

Global smoothing of short line segment toolpaths by control-point-assigning-based geometric smoothing and FIR filtering-based motion smoothing

Mechanical systems and signal processing, 2021-11, Vol.160, p.107908, Article 107908

2021

Link zum Volltext

Verfügbarkeit prüfen

A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-error constraints

International journal of machine tools & manufacture, 2017-05, Vol.116, p.1-17

2017

Link zum Volltext

Verfügbarkeit prüfen

Conversion method study from cutter-location points to nonuniform rational B-spline toolpath NC file for high-speed machining

Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, 2019-01, Vol.233 (2), p.514-525

2019

Link zum Volltext

Verfügbarkeit prüfen

Machining error reduction by combining of feed-speed optimization and toolpath modification in high-speed machining for parts with rapidly varied geometric features

Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, 2018-02, Vol.232 (4), p.557-571

2018

Link zum Volltext

Verfügbarkeit prüfen

Third-order contour-error estimation for arbitrary free-form paths in contour-following tasks

Precision engineering, 2019-11, Vol.60, p.85-92

2019

Link zum Volltext

Verfügbarkeit prüfen

Five-axis toolpath re-scheduling for facilitating assisted supporting thin-walled blade machining by decreasing axis sensitivity

International journal of advanced manufacturing technology, 2024-02, Vol.130 (7-8), p.3583-3607

2024

Link zum Volltext

Verfügbarkeit prüfen

Definition and estimation of joint-space contour error based on generalized curve for five-axis contour following control

Precision engineering, 2020-09, Vol.65, p.32-43

2020

Link zum Volltext

Verfügbarkeit prüfen

Tool-path planning with constraint of cutting force fluctuation for curved surface machining

Precision engineering, 2018-01, Vol.51, p.614-624

2018

Link zum Volltext

Verfügbarkeit prüfen

High-precision estimation and double-loop compensation of contouring errors in five-axis dual-NURBS toolpath following tasks

Precision engineering, 2018-10, Vol.54, p.243-253

2018

Link zum Volltext

Verfügbarkeit prüfen

An efficient 5-axis toolpath optimization algorithm for machining parts with abrupt curvature

Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, 2017-05, Vol.231 (9), p.1609-1621

2017

Link zum Volltext

Verfügbarkeit prüfen

Non-isometric dual-spline interpolation for five-axis machine tools by FIR filtering-based feedrate scheduling using pseudo curvature under axial drive constraint

Journal of manufacturing processes, 2022-07, Vol.79, p.827-843

2022

Link zum Volltext

Verfügbarkeit prüfen

Adaptive estimation and nonlinear variable gain compensation of the contouring error for precise parametric curve following

Science China. Technological sciences, 2017-10, Vol.60 (10), p.1494-1504

2017

Link zum Volltext

Verfügbarkeit prüfen

Contouring-Error Reduction by Combination of Tracking-Error Compensation and Cross- Coupled Control

ESSE 2017, 2017, p.565-574

Wang, Yong

2017

Link zum Volltext

Verfügbarkeit prüfen

Potentiometric detection of polyions based on functionalized magnetic nanopaiticles

Chinese chemical letters, 2010 (11), p.1378-1381

De An Song Rong Ning Liang Rui Ming Zhang Jia Wang Ding Jun Zhang Wei Qin

2010

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 54

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(50)
Mit Volltextzugriff
(52)

Publikationsform

Artikel
(53)
Buchkapitel
(1)

Sprache

Erscheinungsjahr

n.n

Thema

Science & Technology
(35)
Technology
(29)
Engineering
(24)
Engineering, Manufacturing
(16)
Machining
(12)
Engineering, Mechanical
(10)
Machine Tools
(10)
Physical Sciences
(9)
Industrial And Production Engineering
(8)
Mechanical Engineering
(8)
Automation & Control Systems
(7)
Cae) And Design
(7)
Computer-Aided Engineering (cad
(7)
Mathematical Analysis
(7)
Media Management
(7)
Original Article
(7)
Algorithms
(6)
Feedrate Scheduling
(6)
Materials Science
(6)
Chemistry
(5)

15 weitere anzeigen...

Weniger anzeigen...

Menü

Weitere Dienste

Einstellungen

Interval partition-based feedrate scheduling with axial drive constraints for five-axis spline toolpaths

Tool path planning and machining deformation compensation in high-speed milling for difficult-to-machine material thin-walled parts with curved surface

A fully real-time spline interpolation algorithm with axial jerk constraint based on FIR filtering

A method for fast reconstruction of closed section workpiece surface using point clouds

Look-ahead-window-based interval adaptive feedrate scheduling for long five-axis spline toolpaths under axial drive constraints

Estimation and compensation for continuous-path running trajectory error in high-feed-speed machining

A review of contouring-error reduction method in multi-axis CNC machining

Real-Time Contour-Error Estimation Methods for Three-Dimensional Free-Form Parametric Curves in Contour-Following Tasks

An optimization method of tool-path parameters for curved surface by construction of cutter location mesh units

Stability recognition for high-speed milling of TC4 thin-walled parts with curved surface

Synergistic real-time compensation of tracking and contouring errors for precise parametric curved contour following systems

Global smoothing of short line segment toolpaths by control-point-assigning-based geometric smoothing and FIR filtering-based motion smoothing

A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-error constraints

Conversion method study from cutter-location points to nonuniform rational B-spline toolpath NC file for high-speed machining

Machining error reduction by combining of feed-speed optimization and toolpath modification in high-speed machining for parts with rapidly varied geometric features

Third-order contour-error estimation for arbitrary free-form paths in contour-following tasks

Five-axis toolpath re-scheduling for facilitating assisted supporting thin-walled blade machining by decreasing axis sensitivity

Definition and estimation of joint-space contour error based on generalized curve for five-axis contour following control

Tool-path planning with constraint of cutting force fluctuation for curved surface machining

High-precision estimation and double-loop compensation of contouring errors in five-axis dual-NURBS toolpath following tasks

An efficient 5-axis toolpath optimization algorithm for machining parts with abrupt curvature

Non-isometric dual-spline interpolation for five-axis machine tools by FIR filtering-based feedrate scheduling using pseudo curvature under axial drive constraint

Adaptive estimation and nonlinear variable gain compensation of the contouring error for precise parametric curve following

Contouring-Error Reduction by Combination of Tracking-Error Compensation and Cross- Coupled Control

Potentiometric detection of polyions based on functionalized magnetic nanopaiticles

Suchergebnisse filtern