UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 40

Sortiert nach

Synthesis and characterization of Si3N4 wires from binary carbonaceous silica aerogels

Powder technology, 2014-01, Vol.252, p.20-24

2014

Link zum Volltext

Verfügbarkeit prüfen

Preparation and Improved Friction and Wear Performance of the Nano-MoSi2 Coating on Ni Substrate by Plasma Spraying

Metals and Materials International, 2021, 27(6), , pp.1531-1539

2021

Link zum Volltext

Verfügbarkeit prüfen

The Effect of Temperature on the Purity of Nano-Scale Tantalum Powder Produced from Its Scrap by Reaction with Magnesium and Calcium

Iranian journal materials science and engineering (Online), 2021-06, Vol.18 (2), p.0-0

2021

Link zum Volltext

Verfügbarkeit prüfen

The effect of carbon fiber length on the microstructure, selected mechanical, wear, and thermal conductivity of Cf/SiC composite fabricated via spark plasma sintering (SPS) method

한국세라믹학회지, 2023, 60(4), 407, pp.732-745

2023

Link zum Volltext

Verfügbarkeit prüfen

The effect of argon shielding gas at plasma spray process on the structure and properties of MoSi2 coating

Ceramics international, 2014-04, Vol.40 (3), p.4529-4533

2014

Link zum Volltext

Verfügbarkeit prüfen

The influence of processing parameters on the fabrication of Si3N4 wires

Journal of sol-gel science and technology, 2012-10, Vol.64 (1), p.245-250

2012

Link zum Volltext

Verfügbarkeit prüfen

Oxidation behavior of nanostructured and conventional MoSi2 plasma-sprayed coatings

Ceramics international, 2018-09, Vol.44 (13), p.15839-15844

2018

Link zum Volltext

Verfügbarkeit prüfen

Optimization of spark plasma sintering parameters of Si3N4-SiC composite using response surface methodology (RSM)

Ceramics international, 2017-06, Vol.43 (9), p.6815-6821

2017

Link zum Volltext

Verfügbarkeit prüfen

Transparent hydrophobic, self-cleaning, anti-icing and anti-dust nano-structured silica based thin film on cover glass solar cell

Journal of non-crystalline solids, 2022-05, Vol.583, p.121479, Article 121479

2022

Link zum Volltext

Verfügbarkeit prüfen

Investigation of chemical etching and surface modification effect on the superhydrophobic, self-cleaning and corrosion behaviour of aluminium substrate

Bulletin of materials science, 2022-09, Vol.45 (4), p.176, Article 176

2022

Link zum Volltext

Verfügbarkeit prüfen

Structure and mechanical properties of oxygen doped diamond-like carbon thin films

Diamond and related materials, 2016-11, Vol.70, p.91-97

2016

Link zum Volltext

Verfügbarkeit prüfen

Oxygen doping effect on the wettability of diamond-like carbon thin films

Journal of non-crystalline solids, 2017-09, Vol.471, p.410-414

2017

Link zum Volltext

Verfügbarkeit prüfen

Optimization and characterization of laser cladding of NiCr and NiCr–TiC composite coatings on AISI 420 stainless steel

Ceramics international, 2021-02, Vol.47 (3), p.4097-4110

2021

Link zum Volltext

Verfügbarkeit prüfen

Mechanical properties and tribological behaviors of Ni (5Al)-Al2O3-MoS2-Ag composite coatings at various temperatures

Surface & coatings technology, 2023-03, Vol.456, p.129251, Article 129251

2023

Link zum Volltext

Verfügbarkeit prüfen

Optimization of spark plasma sintering parameters of Si 3 N 4 -SiC composite using response surface methodology (RSM)

Ceramics international, 2017-06, Vol.43 (9), p.6815-6821

2017

Link zum Volltext

Verfügbarkeit prüfen

Preparation and Improved Friction and Wear Performance of the Nano-MoSi2 Coating on Ni Substrate by Plasma Spraying

Metals and materials international, 2021-06, p.1531-1539

2021

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and characterization of SiC ultrafine particles by means of sol-gel and carbothermal reduction methods

Ceramics international, 2015-05, Vol.41 (4), p.5779-5784

2015

Link zum Volltext

Verfügbarkeit prüfen

Comparing infrared transmission of zinc sulfide nanostructure ceramic produced via hot pressure and spark plasma sintering methods

International journal of applied ceramic technology, 2022-05, Vol.19 (3), p.1319-1327

2022

Link zum Volltext

Verfügbarkeit prüfen

Investigation on microstructure and high strain rate behaviour of pure tantalum prepared by hot press and subsequent annealing treatment

Powder metallurgy, 2019-05, Vol.62 (3), p.162-168

2019

Link zum Volltext

Verfügbarkeit prüfen

Atmospheric plasma spraying of nanocrystalline SiC particle reinforced MoSi2 prepared by mechanically activated annealing process

Journal of the Australian Ceramic Society, 2019-12, Vol.55 (4), p.1027-1038

2019

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and optimization of the magnetic properties of aligned strontium ferrite nanowires

Materials research bulletin, 2016-04, Vol.76, p.240-246

2016

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and spark plasma sintering of the α-Si3N4 nanopowder

Ceramics international, 2016-10, Vol.42 (13), p.14867-14872

2016

Link zum Volltext

Verfügbarkeit prüfen

The influence of gas flow rate on the structural, mechanical, optical and wettability of diamond-like carbon thin films

Optical and quantum electronics, 2018-04, Vol.50 (4), p.1-14, Article 193

2018

Link zum Volltext

Verfügbarkeit prüfen

Evaluation of processing parameters effects on the formation of Si3N4 wires synthesized by means of ball milling and nitridation route

Advanced powder technology : the international journal of the Society of Powder Technology, Japan, 2014-11, Vol.25 (6), p.1667-1671

2014

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and spark plasma sintering of the α-Si 3 N 4 nanopowder

Ceramics international, 2016-10, Vol.42 (13), p.14867-14872

2016

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 40

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(39)
Mit Volltextzugriff
(37)

Publikationsform

Artikel
(39)
Buchkapitel
(1)

Sprache

Erscheinungsjahr

n.n

Thema

Science & Technology
(29)
Technology
(26)
Materials Science
(21)
Materials Science, Ceramics
(15)
Chemistry And Materials Science
(8)
Materials Science, Multidisciplinary
(8)
Ceramics
(6)
Engineering
(5)
Nanostructure
(5)
Spark Plasma Sintering
(5)
Composites
(4)
Fourier Transforms
(4)
Glass
(4)
Inorganic Chemistry
(4)
Natural Materials
(4)
Process Parameters
(4)
Argon
(3)
Carbon
(3)
Composite
(3)
Field Emission Microscopy
(3)

15 weitere anzeigen...

Weniger anzeigen...

Menü

Weitere Dienste

Einstellungen

Synthesis and characterization of Si3N4 wires from binary carbonaceous silica aerogels

Preparation and Improved Friction and Wear Performance of the Nano-MoSi2 Coating on Ni Substrate by Plasma Spraying

The Effect of Temperature on the Purity of Nano-Scale Tantalum Powder Produced from Its Scrap by Reaction with Magnesium and Calcium

The effect of carbon fiber length on the microstructure, selected mechanical, wear, and thermal conductivity of Cf/SiC composite fabricated via spark plasma sintering (SPS) method

The effect of argon shielding gas at plasma spray process on the structure and properties of MoSi2 coating

The influence of processing parameters on the fabrication of Si3N4 wires

Oxidation behavior of nanostructured and conventional MoSi2 plasma-sprayed coatings

Optimization of spark plasma sintering parameters of Si3N4-SiC composite using response surface methodology (RSM)

Transparent hydrophobic, self-cleaning, anti-icing and anti-dust nano-structured silica based thin film on cover glass solar cell

Investigation of chemical etching and surface modification effect on the superhydrophobic, self-cleaning and corrosion behaviour of aluminium substrate

Structure and mechanical properties of oxygen doped diamond-like carbon thin films

Oxygen doping effect on the wettability of diamond-like carbon thin films

Optimization and characterization of laser cladding of NiCr and NiCr–TiC composite coatings on AISI 420 stainless steel

Mechanical properties and tribological behaviors of Ni (5Al)-Al2O3-MoS2-Ag composite coatings at various temperatures

Optimization of spark plasma sintering parameters of Si 3 N 4 -SiC composite using response surface methodology (RSM)

Preparation and Improved Friction and Wear Performance of the Nano-MoSi2 Coating on Ni Substrate by Plasma Spraying

Synthesis and characterization of SiC ultrafine particles by means of sol-gel and carbothermal reduction methods

Comparing infrared transmission of zinc sulfide nanostructure ceramic produced via hot pressure and spark plasma sintering methods

Investigation on microstructure and high strain rate behaviour of pure tantalum prepared by hot press and subsequent annealing treatment

Atmospheric plasma spraying of nanocrystalline SiC particle reinforced MoSi2 prepared by mechanically activated annealing process

Synthesis and optimization of the magnetic properties of aligned strontium ferrite nanowires

Synthesis and spark plasma sintering of the α-Si3N4 nanopowder

The influence of gas flow rate on the structural, mechanical, optical and wettability of diamond-like carbon thin films

Evaluation of processing parameters effects on the formation of Si3N4 wires synthesized by means of ball milling and nitridation route

Synthesis and spark plasma sintering of the α-Si 3 N 4 nanopowder

Suchergebnisse filtern