UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 47

Sortiert nach

Utilization of Optimization of Internal Topology in Manufacturing of Injection Moulds by the DMLS Technology

Applied sciences, 2021-01, Vol.11 (1), p.262

2021

Volltextzugriff (PDF)

Polylactic Acid and Its Cellulose Based Composite as a Significant Tool for the Production of Optimized Models Modified for Additive Manufacturing

Sustainability, 2021-02, Vol.13 (3), p.1256

2021

Volltextzugriff (PDF)

Acoustic Emission of Corroded Weldments During Tensile Test

Management systems in production engineering, 2019-12, Vol.27 (4), p.211-216

2019

Volltextzugriff (PDF)

ANALYSIS OF PROCESS OF THE MOULD CAVITY FILLING OF THE LIGHTWEIGHT PROFILE FROM MATERIAL PE TIPPELIN 7100S BY THE TECHNOLOGY OF PLASTIC EXTRUSION

MM Science Journal, 2016-11, Vol.2016 (5), p.1185-1189

2016

Volltextzugriff (PDF)

PLUNGER PRESSING SPEED LIKE THE MAIN FACTOR INFLUENCING OF THE MECHANICAL PROPERTIES OF DIE CASTING

MM Science Journal, 2019-12, Vol.2019 (5), p.3490-3493

2019

Volltextzugriff (PDF)

MATHEMATICAL FORMULATION OF THE KINEMATIC EQUATIONS FOR THE CONTROL OF THE ROBOT SYSTEM WITH APPLICATION FOR THE MACHINING CONICAL SURFACES

MM Science Journal, 2018-03, Vol.2018 (1), p.2158-2161

2018

Volltextzugriff (PDF)

Analysis of Influence of Pressing Speed, of Melt Temperature and of Casting Position in a Mold upon Ultimate Tensile Strength Rm of Die Casting from Aluminium

Advanced materials research, 2014-03, Vol.909, p.3-7

2014

Volltextzugriff (PDF)

The Influence of the Tablet Height and Plunger Pressing Velocity on the Final Porosity of Die Casting

Materials science forum, 2018-03, Vol.916, p.244-248

2018

Volltextzugriff (PDF)

Eutecticum Morphology in Al-Si Alloys

Advanced materials research, 2014-07, Vol.1014, p.9-12

2014

Volltextzugriff (PDF)

Metal Flow Velocity in an Intake Port in the Process of Die Casting

Advanced materials research, 2013-06, Vol.705, p.177-180

2013

Volltextzugriff (PDF)

Experimental Monitoring of HB Hardness and Ultimate Tensile Strength UTS of Pressure of Al-Si Castings Depending on the Increase Pressure Changes

Advanced materials research, 2013-06, Vol.711, p.272-275

2013

Volltextzugriff (PDF)

THE RESEARCH OF THE FRACTURE PROCESS AND ANALYSIS OF THE FOUNDRY ERRORS OF DIE CASTINGS FROM HYPOEUTECTIC SILUMIN

MM Science Journal, 2016-11, Vol.2016 (5), p.1265-1268

2016

Volltextzugriff (PDF)

The Effect of Degassing Pressure Casting Molds on the Quality of Pressure Casting

Advanced materials research, 2012, Vol.428, p.43-46

2012

Volltextzugriff (PDF)

INFLUENCE OF RUNNER CROSS-SECTION ON AIR ENTRAPMENT IN PRESSURE DIE CASTS VOLUME

MM Science Journal, 2021-06, Vol.2021 (2), p.4491-4495

2021

Volltextzugriff (PDF)

Increase Pressure and Homogeneity of Die Castings from EN AC 47100 Alloy

Applied Mechanics and Materials, 2015-01, Vol.729 (Materials, Mechanics and Information Engineering), p.108-113

2015

Volltextzugriff (PDF)

Die Casting Defects of Castings from Silumin

Applied Mechanics and Materials, 2014-02, Vol.510 (Materials Engineering for Advanced Technologies (ICMEAT 2013)), p.91-96

2014

Volltextzugriff (PDF)

INFLUENCE OF DIE CASTING FACTORS AND OF HARDENING TEMPERATURE UPON MECHANICAL PROPERTIES OF A DIE CAST

MM Science Journal, 2018-12, Vol.12 (2018), p.2639-2642

2018

Volltextzugriff (PDF)

STRUCTURAL MODIFICATION IMPACT ANALYSIS OF SELECTED COMPONENTS OF SHIELDING EQUIPMENT USING RAPID PROTOTYPING TECHNOLOGY

MM Science Journal, 2018-03, Vol.2018 (1), p.2183-2187

2018

Volltextzugriff (PDF)

Dependence of Mold Temperature on its Cavity Filling Time for the Production of Lightweight Profile Applying the Extrusion Technology

Advanced materials research, 2013-08, Vol.739, p.233-237

2013

Volltextzugriff (PDF)

Research and Evaluation of the Influence of the Construction of the Gate and the Influence of the Piston Velocity on the Distribution of Gases into the Volume of the Casting

Materials, 2021-04, Vol.14 (9), p.2264

2021

Volltextzugriff (PDF)

Influence of the Amount of Recyclate and Regranulate Senosan on Tensile Properties of the Material Starex

Applied Mechanics and Materials, 2014-08, Vol.624 (Advanced Development in Automation, Materials and Manufacturing), p.52-56

2014

Volltextzugriff (PDF)

IMPACT OF CONSTRUCTIONAL MODIFICATION OF THE PRESSURE DIE CASTING MOLD INLET SYSTEM ON THE INTERNAL SOUNDNESS OF THE SILUMIN CASTING

MM Science Journal, 2016-11, Vol.2016 (5), p.1210-1213

2016

Volltextzugriff (PDF)

Influence of Gating System Parameters of Die-Cast Molds on Properties of Al-Si Castings

Materials, 2021-07, Vol.14 (13), p.3755

2021

Volltextzugriff (PDF)

Homogeneity and the Height of the Metal Rest inside a Filling Chamber of Die Casting Machine

Advanced materials research, 2013-08, Vol.746, p.457-461

2013

Volltextzugriff (PDF)

Research on the Impact of Increase Pressure on the Homogeneity of the Cast in Die Casting Technology

Advanced Materials Research, 2015-02, Vol.1091, p.77-82

2015

Volltextzugriff (PDF)

1 – 25 von 47

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(45)
Mit Volltextzugriff
(47)

Publikationsform

Artikel
(46)
Tagungsberichte
(1)

Sprache

Erscheinungsjahr

n.n

Thema

Science & Technology
(30)
Technology
(18)
Engineering
(10)
Life Sciences & Biomedicine
(10)
Materials Science
(10)
Materials Science, Multidisciplinary
(10)
Die Casting
(9)
Mechanical Properties
(8)
Engineering, Mechanical
(7)
Physical Sciences
(7)
Physics
(7)
Chemistry
(5)
Physics, Applied
(5)
Homogeneity
(4)
Metallurgy & Metallurgical Engineering
(4)
Molds
(4)
Pressure Die Casting
(4)
Zoology
(4)
Additive Manufacturing
(3)
Animals
(3)

15 weitere anzeigen...

Weniger anzeigen...

Menü

Weitere Dienste

Einstellungen

Utilization of Optimization of Internal Topology in Manufacturing of Injection Moulds by the DMLS Technology

Polylactic Acid and Its Cellulose Based Composite as a Significant Tool for the Production of Optimized Models Modified for Additive Manufacturing

Acoustic Emission of Corroded Weldments During Tensile Test

ANALYSIS OF PROCESS OF THE MOULD CAVITY FILLING OF THE LIGHTWEIGHT PROFILE FROM MATERIAL PE TIPPELIN 7100S BY THE TECHNOLOGY OF PLASTIC EXTRUSION

PLUNGER PRESSING SPEED LIKE THE MAIN FACTOR INFLUENCING OF THE MECHANICAL PROPERTIES OF DIE CASTING

MATHEMATICAL FORMULATION OF THE KINEMATIC EQUATIONS FOR THE CONTROL OF THE ROBOT SYSTEM WITH APPLICATION FOR THE MACHINING CONICAL SURFACES

Analysis of Influence of Pressing Speed, of Melt Temperature and of Casting Position in a Mold upon Ultimate Tensile Strength Rm of Die Casting from Aluminium

The Influence of the Tablet Height and Plunger Pressing Velocity on the Final Porosity of Die Casting

Eutecticum Morphology in Al-Si Alloys

Metal Flow Velocity in an Intake Port in the Process of Die Casting

Experimental Monitoring of HB Hardness and Ultimate Tensile Strength UTS of Pressure of Al-Si Castings Depending on the Increase Pressure Changes

THE RESEARCH OF THE FRACTURE PROCESS AND ANALYSIS OF THE FOUNDRY ERRORS OF DIE CASTINGS FROM HYPOEUTECTIC SILUMIN

The Effect of Degassing Pressure Casting Molds on the Quality of Pressure Casting

INFLUENCE OF RUNNER CROSS-SECTION ON AIR ENTRAPMENT IN PRESSURE DIE CASTS VOLUME

Increase Pressure and Homogeneity of Die Castings from EN AC 47100 Alloy

Die Casting Defects of Castings from Silumin

INFLUENCE OF DIE CASTING FACTORS AND OF HARDENING TEMPERATURE UPON MECHANICAL PROPERTIES OF A DIE CAST

STRUCTURAL MODIFICATION IMPACT ANALYSIS OF SELECTED COMPONENTS OF SHIELDING EQUIPMENT USING RAPID PROTOTYPING TECHNOLOGY

Dependence of Mold Temperature on its Cavity Filling Time for the Production of Lightweight Profile Applying the Extrusion Technology

Research and Evaluation of the Influence of the Construction of the Gate and the Influence of the Piston Velocity on the Distribution of Gases into the Volume of the Casting

Influence of the Amount of Recyclate and Regranulate Senosan on Tensile Properties of the Material Starex

IMPACT OF CONSTRUCTIONAL MODIFICATION OF THE PRESSURE DIE CASTING MOLD INLET SYSTEM ON THE INTERNAL SOUNDNESS OF THE SILUMIN CASTING

Influence of Gating System Parameters of Die-Cast Molds on Properties of Al-Si Castings

Homogeneity and the Height of the Metal Rest inside a Filling Chamber of Die Casting Machine

Research on the Impact of Increase Pressure on the Homogeneity of the Cast in Die Casting Technology

Suchergebnisse filtern