UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 30

Sortiert nach

A Numerical and Experimental Analysis of the Mechanical Behavior of the Aluminum Beverage Can with Internal Varnish Layers during Axial Load Force Testing

Materials, 2023-10, Vol.16 (19), p.6603

2023

Link zum Volltext

Verfügbarkeit prüfen

A Flow Stress Model of the AA3104-H19 Alloy for the FEM Simulation of the Beverage Can Manufacturing Process under Large Plastic Deformations

Materials, 2021-10, Vol.14 (21), p.6408

2021

Link zum Volltext

Verfügbarkeit prüfen

Experimental and Numerical Study of Surface Roughness of Thin Brass Wire Processed by Different Dieless Drawing Processes

Materials, 2021-12, Vol.15 (1), p.35

2021

Link zum Volltext

Verfügbarkeit prüfen

Investigation of the workability and surface roughness of thin brass wires in various dieless drawing technologies

Archives of Civil and Mechanical Engineering, 2021-11, Vol.22 (1), p.10, Article 10

2021

Link zum Volltext

Verfügbarkeit prüfen

Microstructure and In Vitro Evaluation of Extruded and Hot Drawn Alloy MgCa0.7 for Biodegradable Surgical Wires

Materials, 2021-11, Vol.14 (21), p.6673

2021

Link zum Volltext

Verfügbarkeit prüfen

Production Process of Biocompatible Magnesium Alloy Tubes Using Extrusion and Dieless Drawing Processes

Journal of materials engineering and performance, 2016-06, Vol.25 (6), p.2528-2535

2016

Link zum Volltext

Verfügbarkeit prüfen

Analysis of Microstructure and Damage Evolution in Ultra-Thin Wires of the Magnesium Alloy MgCa0.8 at Multipass Drawing

JOM (1989), 2016-12, Vol.68 (12), p.3063-3069

2016

Link zum Volltext

Verfügbarkeit prüfen

Mg–Ca Surgical Wires Degradation in Animal Serum

Metallurgical and materials transactions. A, Physical metallurgy and materials science, 2024-06, Vol.55 (6), p.2141-2152

2024

Link zum Volltext

Verfügbarkeit prüfen

The process of ultra-fine wire drawing for magnesium alloy with the guaranteed restoration of ductility between passes

Journal of materials processing technology, 2017-09, Vol.247, p.234-242

2017

Link zum Volltext

Verfügbarkeit prüfen

Design of the laser dieless drawing process of tubes from magnesium alloy using FEM model

Journal of materials processing technology, 2018-12, Vol.262, p.65-74

2018

Link zum Volltext

Verfügbarkeit prüfen

Novel drawing technology for high area reduction manufacturing of ultra-thin brass wires

Archives of Civil and Mechanical Engineering, 2023-05, Vol.23 (3), p.144, Article 144

2023

Link zum Volltext

Verfügbarkeit prüfen

Optimization of Profile Extrusion Processes Using the Finite Element Method and Distributed Computing

eScience on Distributed Computing Infrastructure, p.378-390

Link zum Volltext

Verfügbarkeit prüfen

Mechanical properties, crystallographic texture, and in vitro bio-corrosion of low-alloyed Zn–Mg, produced by hot and cold drawing for biodegradable surgical wires

Archives of Civil and Mechanical Engineering, 2021-12, Vol.21 (4), p.163, Article 163

2021

Link zum Volltext

Verfügbarkeit prüfen

Computer aided design of the laser dieless drawing process of tubes from magnesium alloy with take into account ductility of the material

Procedia manufacturing, 2018, Vol.15, p.302-310

2018

Link zum Volltext

Verfügbarkeit prüfen

The effect of in vitro corrosion on the mechanical properties of metallic high strength biodegradable surgical threads

Archives of Civil and Mechanical Engineering, 2020-05, Vol.20 (2), p.60, Article 60

2020

Link zum Volltext

Verfügbarkeit prüfen

Manufacture technology, mechanical and biocorrosion properties of the Zn and ZnMg0.008 alloy wires designed for biodegradable surgical threads

Journal of manufacturing processes, 2021-07, Vol.67, p.513-520

2021

Link zum Volltext

Verfügbarkeit prüfen

Physical and Numerical Modelling of Laser Dieless Drawing Process of Tubes from Magnesium Alloy

Procedia engineering, 2017, Vol.207, p.2352-2357

2017

Link zum Volltext

Verfügbarkeit prüfen

FEM-BEM Code for the Multiscale Modeling and Computer Aided Design of Wire Drawing Technology for Magnesium Alloys

Advanced engineering materials, 2014-02, Vol.16 (2), p.202-210

2014

Link zum Volltext

Verfügbarkeit prüfen

Model of Residual Stresses in Hot-rolled Sheets with Taking into Account Relaxation Process and Phase Transformation

Procedia engineering, 2014, Vol.81, p.108-113

2014

Link zum Volltext

Verfügbarkeit prüfen

The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire

Forming the Future, p.467-478

Link zum Volltext

Verfügbarkeit prüfen

Production of zinc wire for use as a high strength biodegradable surgical threads

Procedia manufacturing, 2020, Vol.50, p.757-760

2020

Link zum Volltext

Verfügbarkeit prüfen

The influence of the parameters of hot drawing of MgCa alloys wires on the mechanical properties that determine the applicability of the material as a high strength biodegradable surgical thread

Procedia manufacturing, 2020, Vol.50, p.804-808

2020

Link zum Volltext

Verfügbarkeit prüfen

The Multi-Scale FEM Simulation of Wire Fracture during Drawing of Perlitic Steel

Materials science forum, 2008, Vol.575-578, p.1433-1438

2008

Link zum Volltext

Verfügbarkeit prüfen

Assessing the Condition of the Material of Pressure Vessel after Their Long-Lasting Operation in the Petrochemical Industry Using Non-Destructive Acoustic Methods and Structural Stress Field Analysis

Biuletyn Instytutu Spawalnictwa, 2019, Vol.2019 (3), p.53-60

2019

Link zum Volltext

Verfügbarkeit prüfen

Assessing Highway Travel Time Reliability using Probe Vehicle Data

Transportation research record, 2018-12, Vol.2672 (15), p.118-130

2018

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 30

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(24)
Mit Volltextzugriff
(29)

Publikationsform

Sprache

Englisch
(30)
Japanisch
(3)

Erscheinungsjahr

n.n

Thema

Science & Technology
(26)
Technology
(24)
Engineering
(15)
Materials Science
(15)
Materials Science, Multidisciplinary
(15)
Metallurgy & Metallurgical Engineering
(9)
Wire
(8)
Deformation
(7)
Mechanical Properties
(7)
Wire Drawing
(7)
Ductility
(6)
Engineering, Civil
(6)
Engineering, Manufacturing
(6)
Magnesium Alloys
(6)
Magnesium Base Alloys
(6)
Mathematical Models
(6)
Biocompatibility
(5)
Civil Engineering
(5)
Corrosion
(5)
Physical Sciences
(5)

15 weitere anzeigen...

Weniger anzeigen...

Menü

Weitere Dienste

Einstellungen

A Numerical and Experimental Analysis of the Mechanical Behavior of the Aluminum Beverage Can with Internal Varnish Layers during Axial Load Force Testing

A Flow Stress Model of the AA3104-H19 Alloy for the FEM Simulation of the Beverage Can Manufacturing Process under Large Plastic Deformations

Experimental and Numerical Study of Surface Roughness of Thin Brass Wire Processed by Different Dieless Drawing Processes

Investigation of the workability and surface roughness of thin brass wires in various dieless drawing technologies

Microstructure and In Vitro Evaluation of Extruded and Hot Drawn Alloy MgCa0.7 for Biodegradable Surgical Wires

Production Process of Biocompatible Magnesium Alloy Tubes Using Extrusion and Dieless Drawing Processes

Analysis of Microstructure and Damage Evolution in Ultra-Thin Wires of the Magnesium Alloy MgCa0.8 at Multipass Drawing

Mg–Ca Surgical Wires Degradation in Animal Serum

The process of ultra-fine wire drawing for magnesium alloy with the guaranteed restoration of ductility between passes

Design of the laser dieless drawing process of tubes from magnesium alloy using FEM model

Novel drawing technology for high area reduction manufacturing of ultra-thin brass wires

Optimization of Profile Extrusion Processes Using the Finite Element Method and Distributed Computing

Mechanical properties, crystallographic texture, and in vitro bio-corrosion of low-alloyed Zn–Mg, produced by hot and cold drawing for biodegradable surgical wires

Computer aided design of the laser dieless drawing process of tubes from magnesium alloy with take into account ductility of the material

The effect of in vitro corrosion on the mechanical properties of metallic high strength biodegradable surgical threads

Manufacture technology, mechanical and biocorrosion properties of the Zn and ZnMg0.008 alloy wires designed for biodegradable surgical threads

Physical and Numerical Modelling of Laser Dieless Drawing Process of Tubes from Magnesium Alloy

FEM-BEM Code for the Multiscale Modeling and Computer Aided Design of Wire Drawing Technology for Magnesium Alloys

Model of Residual Stresses in Hot-rolled Sheets with Taking into Account Relaxation Process and Phase Transformation

The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire

Production of zinc wire for use as a high strength biodegradable surgical threads

The influence of the parameters of hot drawing of MgCa alloys wires on the mechanical properties that determine the applicability of the material as a high strength biodegradable surgical thread

The Multi-Scale FEM Simulation of Wire Fracture during Drawing of Perlitic Steel

Assessing the Condition of the Material of Pressure Vessel after Their Long-Lasting Operation in the Petrochemical Industry Using Non-Destructive Acoustic Methods and Structural Stress Field Analysis

Assessing Highway Travel Time Reliability using Probe Vehicle Data

Suchergebnisse filtern