UB Paderborn / Katalog / Suche / in CDI

Sortiert nach

High strength and ductility in low-cost Ti–Al–Fe–Mn alloy exhibiting transformation-induced plasticity

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2020-01, Vol.772, p.138813, Article 138813

2020

Link zum Volltext

Verfügbarkeit prüfen

A high output magneto-mechano-triboelectric generator enabled by accelerated water-soluble nano-bullets for powering a wireless indoor positioning system

Energy & environmental science, 2019-02, Vol.12 (2), p.666-674

2019

Link zum Volltext

Verfügbarkeit prüfen

Correlating the 3D melt electrospun polycaprolactone fiber diameter and process parameters using neural networks

Journal of applied polymer science, 2021-08, Vol.138 (37), p.n/a

2021

Link zum Volltext

Verfügbarkeit prüfen

Understanding Crack Formation Mechanisms of Ti–48Al–2Cr–2Nb Single Tracks During Laser Powder Bed Fusion

Metals and Materials International, 2021, 27(1), , pp.78-91

2021

Link zum Volltext

Verfügbarkeit prüfen

High strength and high ductility in the Co–20Cr–15W–10Ni alloy having a bimodal grain structure achieved by static recrystallization

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2018-08, Vol.732, p.70-77

2018

Link zum Volltext

Verfügbarkeit prüfen

Optimization of process parameters for direct energy deposited Ti-6Al-4V alloy using neural networks

International journal of advanced manufacturing technology, 2021-06, Vol.114 (11-12), p.3269-3283

2021

Link zum Volltext

Verfügbarkeit prüfen

Study on microstructure and mechanical property of a biomedical Co-20Cr-15W-10Ni alloy during multi-pass thermomechanical processing

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2020-05, Vol.785, p.139388, Article 139388

2020

Link zum Volltext

Verfügbarkeit prüfen

Calibration of Laser Penetration Depth and Absorptivity in Finite Element Method Based Modeling of Powder Bed Fusion Melt Pools

Metals and Materials International, 2020, 26(6), , pp.891-902

2020

Link zum Volltext

Verfügbarkeit prüfen

A Comparison Study of Fatigue Behavior of Hard and Soft Piezoelectric Single Crystal Macro-Fiber Composites for Vibration Energy Harvesting

Sensors (Basel, Switzerland), 2019-05, Vol.19 (9), p.2196

2019

Link zum Volltext

Verfügbarkeit prüfen

Characterization of Hot Deformation Behavior and Processing Maps of Ti–19Al–22Mo Alloy

Metals and Materials International, 2019, 25(4), , pp.1063-1071

2019

Link zum Volltext

Verfügbarkeit prüfen

Estimation of Transformation Temperatures in Ti–Ni–Pd Shape Memory Alloys

Metals and Materials International, 2018, 24(5), , pp.919-925

2018

Link zum Volltext

Verfügbarkeit prüfen

Accelerating globularization in additively manufactured Ti-6Al-4V by exploiting martensitic laths

Journal of materials research and technology, 2021-05, Vol.12, p.304-315

2021

Link zum Volltext

Verfügbarkeit prüfen

Formation of equiaxed grains in selective laser melted pure titanium during annealing

Journal of materials research and technology, 2021-03, Vol.11, p.301-311

2021

Link zum Volltext

Verfügbarkeit prüfen

Bimodal grain structures and tensile properties of a biomedical Co–20Cr–15W–10Ni alloy with different pre-strains

Rare metals, 2021, Vol.40 (1), p.20-30

2021

Link zum Volltext

Verfügbarkeit prüfen

Enhancing the mechanical properties and corrosion resistance of commercially pure titanium using tungsten carbide composites fabricated via additive manufacturing

Journal of materials research and technology, 2023-11, Vol.27, p.5070-5081

2023

Link zum Volltext

Verfügbarkeit prüfen

Microstructural evolution and tensile properties of direct energy deposited Ti-4Al-5Co-0.25Si alloy during heat treatment

Journal of alloys and compounds, 2024-07, Vol.993, p.174657, Article 174657

2024

Link zum Volltext

Verfügbarkeit prüfen

Twinning-induced Plasticity Mechanism of α″-martensitic Titanium Alloy

Acta materialia, 2023-04, Vol.248, p.118763, Article 118763

2023

Link zum Volltext

Verfügbarkeit prüfen

Thermal stability of bimodal grain structure in a cobalt-based superalloy subjected to high-temperature exposure

Rare metals, 2021-04, Vol.40 (4), p.877-884

2021

Link zum Volltext

Verfügbarkeit prüfen

Effect of Electric Current Heat Treatment on Commercially Pure Titanium Sheets

Metals (Basel ), 2021-05, Vol.11 (5), p.783

2021

Link zum Volltext

Verfügbarkeit prüfen

Twin Boundary Induced Grain Coarsening in Friction Stir Welding of Fine- and Ultra-Fine-Grained Commercially Pure Titanium Base Metals

Metals (Basel ), 2022-08, Vol.12 (8), p.1361

2022

Link zum Volltext

Verfügbarkeit prüfen

Realizing superior ductility of selective laser melted Ti-6Al-4V through a multi-step heat treatment

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2021-01, Vol.799, p.140367, Article 140367

2021

Link zum Volltext

Verfügbarkeit prüfen

An effective approach to produce a nanocrystalline Ni–Ti shape memory alloy without severe plastic deformation

Journal of alloys and compounds, 2016-01, Vol.654, p.379-383

2016

Link zum Volltext

Verfügbarkeit prüfen

Microstructure and strength–ductility balance of pure titanium processed by cryogenic rolling at various rolling reductions

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2020-11, Vol.798, p.140328, Article 140328

2020

Link zum Volltext

Verfügbarkeit prüfen

Deformation mechanism of metastable titanium alloy showing stress-induced α′-Martensitic transformation

Journal of alloys and compounds, 2019-04, Vol.782, p.427-432

2019

Link zum Volltext

Verfügbarkeit prüfen

Demonstration of martensite reorientation-induced plasticity by ultra-high strength titanium alloys

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2021-03, Vol.807, p.140878, Article 140878

2021

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 166

Suche als RSS-Feed

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(152)
Mit Volltextzugriff
(165)

Publikationsform

Sprache

Englisch
(152)
Japanisch
(20)
Koreanisch
(13)

Erscheinungsjahr

n.n

Thema

Science & Technology
(117)
Technology
(80)
Materials Science
(75)
Materials Science, Multidisciplinary
(68)
Metallurgy & Metallurgical Engineering
(56)
Physical Sciences
(37)
Chemistry
(32)
Life Sciences & Biomedicine
(29)
Titanium Base Alloys
(25)
Science & Technology - Other Topics
(22)
Chemistry, Physical
(21)
Nanoscience & Nanotechnology
(21)
Mechanical Properties
(17)
Humans
(16)
Microstructure
(16)
Chemistry And Materials Science
(15)
Chemistry, Multidisciplinary
(12)
Ductility
(12)
Female
(12)
Characterization And Evaluation Of Materials
(11)

15 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

... seit 30 Tagen
(1)
... seit 90 Tagen
(3)

Menü

Weitere Dienste

Einstellungen

High strength and ductility in low-cost Ti–Al–Fe–Mn alloy exhibiting transformation-induced plasticity

A high output magneto-mechano-triboelectric generator enabled by accelerated water-soluble nano-bullets for powering a wireless indoor positioning system

Correlating the 3D melt electrospun polycaprolactone fiber diameter and process parameters using neural networks

Understanding Crack Formation Mechanisms of Ti–48Al–2Cr–2Nb Single Tracks During Laser Powder Bed Fusion

High strength and high ductility in the Co–20Cr–15W–10Ni alloy having a bimodal grain structure achieved by static recrystallization

Optimization of process parameters for direct energy deposited Ti-6Al-4V alloy using neural networks

Study on microstructure and mechanical property of a biomedical Co-20Cr-15W-10Ni alloy during multi-pass thermomechanical processing

Calibration of Laser Penetration Depth and Absorptivity in Finite Element Method Based Modeling of Powder Bed Fusion Melt Pools

A Comparison Study of Fatigue Behavior of Hard and Soft Piezoelectric Single Crystal Macro-Fiber Composites for Vibration Energy Harvesting

Characterization of Hot Deformation Behavior and Processing Maps of Ti–19Al–22Mo Alloy

Estimation of Transformation Temperatures in Ti–Ni–Pd Shape Memory Alloys

Accelerating globularization in additively manufactured Ti-6Al-4V by exploiting martensitic laths

Formation of equiaxed grains in selective laser melted pure titanium during annealing

Bimodal grain structures and tensile properties of a biomedical Co–20Cr–15W–10Ni alloy with different pre-strains

Enhancing the mechanical properties and corrosion resistance of commercially pure titanium using tungsten carbide composites fabricated via additive manufacturing

Microstructural evolution and tensile properties of direct energy deposited Ti-4Al-5Co-0.25Si alloy during heat treatment

Twinning-induced Plasticity Mechanism of α″-martensitic Titanium Alloy

Thermal stability of bimodal grain structure in a cobalt-based superalloy subjected to high-temperature exposure

Effect of Electric Current Heat Treatment on Commercially Pure Titanium Sheets

Twin Boundary Induced Grain Coarsening in Friction Stir Welding of Fine- and Ultra-Fine-Grained Commercially Pure Titanium Base Metals

Realizing superior ductility of selective laser melted Ti-6Al-4V through a multi-step heat treatment

An effective approach to produce a nanocrystalline Ni–Ti shape memory alloy without severe plastic deformation

Microstructure and strength–ductility balance of pure titanium processed by cryogenic rolling at various rolling reductions

Deformation mechanism of metastable titanium alloy showing stress-induced α′-Martensitic transformation

Demonstration of martensite reorientation-induced plasticity by ultra-high strength titanium alloys

Suchergebnisse filtern