UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 429

Sortiert nach

Glass Formation in LaO3/2-TiO2 Binary System by Containerless Processing

Journal of the American Ceramic Society, 2012-01, Vol.95 (1), p.79-81

2012

Link zum Volltext

Verfügbarkeit prüfen

Hydrothermal synthesis and characterization of rare earth doped yttrium aluminium perovskite – R:YAlO3 (R=Nd, Eu & Er)

Journal of alloys and compounds, 2013-03, Vol.552, p.382-386

2013

Link zum Volltext

Verfügbarkeit prüfen

Effect of Oxygen Partial Pressure on the Formation of Metastable Phases from an Undercooled YbFeO3 Melt Using an Aerodynamic Levitator

Journal of the American Ceramic Society, 2009-04, Vol.92 (4), p.903-910

2009

Link zum Volltext

Verfügbarkeit prüfen

Formation of Hexagonal Metastable Phases from an Undercooled LuFeO3 Melt in an Atmosphere with Low Oxygen Partial Pressure

Journal of the American Ceramic Society, 2008-03, Vol.91 (3), p.806-812

2008

Link zum Volltext

Verfügbarkeit prüfen

Novel criterion for formation of metastable phase from undercooled melt

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2007-03, Vol.449, p.675-679

2007

Link zum Volltext

Verfügbarkeit prüfen

Optimization of drilling process parameters for self-lubricants reinforced aluminium metal matrix composites

Materials today : proceedings, 2022, Vol.52, p.1461-1465

2022

Link zum Volltext

Verfügbarkeit prüfen

Mathematical model for the impact strength of triple-blended steel fiber self-compacting concrete based on the experimental study

Materials today : proceedings, 2022, Vol.60, p.576-581

2022

Link zum Volltext

Verfügbarkeit prüfen

Design and analysis of new pitch angle controller for enhancing the performance of wind turbine coupled with PMSG

Materials today : proceedings, 2022, Vol.52, p.1456-1460

2022

Link zum Volltext

Verfügbarkeit prüfen

Metastable Phase Formation From Undercooled Melt Of REFeO3 (RE: Rare-Earth Element)

Reviews on advanced materials science, 2008-10, Vol.18 (5), p.444-447

2008

Link zum Volltext

Verfügbarkeit prüfen

Formation of LuFe2O4 phase from an undercooled LuFeO3 melt in reduced oxygen partial pressure

Journal of materials research, 2008-11, Vol.23 (11), p.2996-3005

2008

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and Catalytic and Biological Activities of Silver and Copper Nanoparticles Using Cassia occidentalis

International journal of biomaterials, 2018-01, Vol.2018, p.6735426-10

2018

Link zum Volltext

Verfügbarkeit prüfen

Surface Activation and Pretreatments for Biocompatible Metals and Alloys Used in Biomedical Applications

International journal of biomaterials, 2019-01, Vol.2019, p.3806504-21

2019

Link zum Volltext

Verfügbarkeit prüfen

Extraction and Characterization of Novel Natural Hydroxyapatite Bioceramic by Thermal Decomposition of Waste Ostrich Bone

International journal of biomaterials, 2020, Vol.2020, p.1-10

2020

Link zum Volltext

Verfügbarkeit prüfen

Improvement of Physicomechanical Properties of Pineapple Leaf Fiber Reinforced Composite

International journal of biomaterials, 2018-01, Vol.2018, p.7384360-7

2018

Link zum Volltext

Verfügbarkeit prüfen

Cotton Cellulose-Derived Hydrogel and Electrospun Fiber as Alternative Material for Wound Dressing Application

International journal of biomaterials, 2022-03, Vol.2022, p.2502658-12

2022

Link zum Volltext

Verfügbarkeit prüfen

Potentials of Biochars Derived from Bamboo Leaf Biomass as Energy Sources: Effect of Temperature and Time of Heating

International journal of biomaterials, 2019, Vol.2019, p.3526145-9

2019

Link zum Volltext

Verfügbarkeit prüfen

Comparison of Cell Viability and Chemical Composition of Six Latest Generation Orthodontic Wires

International journal of biomaterials, 2021, Vol.2021, p.8885290-10

2021

Link zum Volltext

Verfügbarkeit prüfen

Cyclic Fatigue Resistance of Blue Heat-Treated Instruments at Different Temperatures

International journal of biomaterials, 2021, Vol.2021, p.1-5

2021

Link zum Volltext

Verfügbarkeit prüfen

Physical and Tensile Properties of Handmade Sida rhombifolia Paper

International journal of biomaterials, 2020, Vol.2020, p.1-8

2020

Link zum Volltext

Verfügbarkeit prüfen

Synthesis of Nanohydroxyapatite from Cuttlefish Bone (Sepia sp.) Using Milling Method

International journal of biomaterials, 2019-01, Vol.2019, p.1831208-6

2019

Link zum Volltext

Verfügbarkeit prüfen

Synthesis and characterisation of R3+ : AlPO4 (where R=Ce, Pr and Nd)

Materials research innovations, 2007-09, Vol.11 (3), p.122-126

2007

Link zum Volltext

Verfügbarkeit prüfen

Production Planning and Process Improvement in an Impeller Manufacturing Using Scheduling and OEE Techniques

Procedia materials science, 2014, Vol.5, p.1710-1715

2014

Link zum Volltext

Verfügbarkeit prüfen

Enhancement of the Mechanical Properties of Hydroxyapatite/Sulphonated Poly Ether Ether Ketone Treated Layer for Orthopaedic and Dental Implant Application

International journal of biomaterials, 2018-01, Vol.2018, p.9607195-9

2018

Link zum Volltext

Verfügbarkeit prüfen

Formation of Orthorhombic and Multiferroic Hexagonal Phases from an Undercooled RMnO3 (R=Rare-Earth Element) Melt Using a Containerless Technique

Journal of the American Ceramic Society, 2011-01, Vol.94 (1), p.281-288

2011

Link zum Volltext

Verfügbarkeit prüfen

Modeling and Synthesis of Ag and Ag/Ni Allied Bimetallic Nanoparticles by Green Method: Optical and Biological Properties

International journal of biomaterials, 2018-01, Vol.2018, p.9658080-17

2018

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 429

Suche als RSS-Feed

Aktive Filter

ThemaMaterials Science

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(371)
Mit Volltextzugriff
(425)

Publikationsform

Sprache

Erscheinungsjahr

n.n

Thema

Science & Technology
(413)
Technology
(388)
Materials Science, Multidisciplinary
(291)
Physical Sciences
(174)
Physics
(123)
Engineering
(91)
Physics, Applied
(86)
Chemistry
(71)
Exact Sciences And Technology
(59)
Science & Technology - Other Topics
(57)
Chemistry And Materials Science
(54)
Chemistry, Physical
(45)
Nanoscience & Nanotechnology
(45)
Engineering, Electrical & Electronic
(39)
Nanoparticles
(39)
Physics, Condensed Matter
(37)
Cross-Disciplinary Physics: Materials Science; Rheology
(36)
Characterization And Evaluation Of Materials
(31)
Mechanical Properties
(28)

14 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

... seit 30 Tagen
(3)
... seit 90 Tagen
(4)

Menü

Weitere Dienste

Einstellungen

Glass Formation in LaO3/2-TiO2 Binary System by Containerless Processing

Hydrothermal synthesis and characterization of rare earth doped yttrium aluminium perovskite – R:YAlO3 (R=Nd, Eu & Er)

Effect of Oxygen Partial Pressure on the Formation of Metastable Phases from an Undercooled YbFeO3 Melt Using an Aerodynamic Levitator

Formation of Hexagonal Metastable Phases from an Undercooled LuFeO3 Melt in an Atmosphere with Low Oxygen Partial Pressure

Novel criterion for formation of metastable phase from undercooled melt

Optimization of drilling process parameters for self-lubricants reinforced aluminium metal matrix composites

Mathematical model for the impact strength of triple-blended steel fiber self-compacting concrete based on the experimental study

Design and analysis of new pitch angle controller for enhancing the performance of wind turbine coupled with PMSG

Metastable Phase Formation From Undercooled Melt Of REFeO3 (RE: Rare-Earth Element)

Formation of LuFe2O4 phase from an undercooled LuFeO3 melt in reduced oxygen partial pressure

Synthesis and Catalytic and Biological Activities of Silver and Copper Nanoparticles Using Cassia occidentalis

Surface Activation and Pretreatments for Biocompatible Metals and Alloys Used in Biomedical Applications

Extraction and Characterization of Novel Natural Hydroxyapatite Bioceramic by Thermal Decomposition of Waste Ostrich Bone

Improvement of Physicomechanical Properties of Pineapple Leaf Fiber Reinforced Composite

Cotton Cellulose-Derived Hydrogel and Electrospun Fiber as Alternative Material for Wound Dressing Application

Potentials of Biochars Derived from Bamboo Leaf Biomass as Energy Sources: Effect of Temperature and Time of Heating

Comparison of Cell Viability and Chemical Composition of Six Latest Generation Orthodontic Wires

Cyclic Fatigue Resistance of Blue Heat-Treated Instruments at Different Temperatures

Physical and Tensile Properties of Handmade Sida rhombifolia Paper

Synthesis of Nanohydroxyapatite from Cuttlefish Bone (Sepia sp.) Using Milling Method

Synthesis and characterisation of R3+ : AlPO4 (where R=Ce, Pr and Nd)

Production Planning and Process Improvement in an Impeller Manufacturing Using Scheduling and OEE Techniques

Enhancement of the Mechanical Properties of Hydroxyapatite/Sulphonated Poly Ether Ether Ketone Treated Layer for Orthopaedic and Dental Implant Application

Formation of Orthorhombic and Multiferroic Hexagonal Phases from an Undercooled RMnO3 (R=Rare-Earth Element) Melt Using a Containerless Technique

Modeling and Synthesis of Ag and Ag/Ni Allied Bimetallic Nanoparticles by Green Method: Optical and Biological Properties

Aktive Filter

Suchergebnisse filtern