UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 7.965

Sortiert nach

Requirements for Metal and Alloy Powders for 3D Printing (Review)

Powder metallurgy and metal ceramics, 2022-07, Vol.61 (3-4), p.135-154

2022

Link zum Volltext

Verfügbarkeit prüfen

Rapidly fabricating Y2O3 transparent ceramics at low temperature by SPS with mesoporous powder

Journal of the American Ceramic Society, 2023-04, Vol.106 (4), p.2491-2500

2023

Link zum Volltext

Verfügbarkeit prüfen

Enhancement of piezoelectric properties of BF–BT ceramics by using ZrO2 powder bed during the sintering process

Journal of the American Ceramic Society, 2023-04, Vol.106 (4), p.2384-2392

2023

Link zum Volltext

Verfügbarkeit prüfen

Study of alumina ceramic parts fabricated via DLP stereolithography using powders with different sizes and morphologies

International journal of applied ceramic technology, 2023-03, Vol.20 (2), p.1167-1193

2023

Link zum Volltext

Verfügbarkeit prüfen

Microstructure and phase transformation behavior of Al2O3–ZrO2 under microwave sintering

Ceramics international, 2023-02, Vol.49 (3), p.4855-4862

2023

Link zum Volltext

Verfügbarkeit prüfen

Powder Compaction Dies and Compressibility of Various Materials

Powder metallurgy and metal ceramics, 2021-11, Vol.60 (7-8), p.403-409

2021

Link zum Volltext

Verfügbarkeit prüfen

Process development for the laser powder bed fusion of WC‐Ni Cermets using sintered‐agglomerated powder

International journal of applied ceramic technology, 2022-05, Vol.19 (3), p.1328-1340

2022

Link zum Volltext

Verfügbarkeit prüfen

Manufacturing porous ceramic materials by tape casting—A review

Journal of the European Ceramic Society, 2018-04, Vol.38 (4), p.988-1001

2018

Link zum Volltext

Verfügbarkeit prüfen

Sintering behavior of bimodal iron nanopowder agglomerates

Journal of the American Ceramic Society, 2019-06, Vol.102 (6), p.3791-3801

2019

Link zum Volltext

Verfügbarkeit prüfen

Clad TiCrC(Ni) Composite Powders for Thermal Spraying of Coatings

Powder metallurgy and metal ceramics, 2021-05, Vol.60 (1-2), p.1-6

2021

Link zum Volltext

Verfügbarkeit prüfen

Compositional design of single-phase rare-earth based high-entropy oxides (HEOs) by using the cluster-plus-glue atom model

Ceramics international, 2023-03, Vol.49 (5), p.7662-7669

2023

Link zum Volltext

Verfügbarkeit prüfen

Features of the Sintering of Fe–Cu–Sn–Ni and Cu–Ti–Sn–Ni Powders during Hot Pressing

Powder metallurgy and metal ceramics, 2021-09, Vol.60 (5-6), p.377-384

2021

Link zum Volltext

Verfügbarkeit prüfen

Structural evolution and synthesis mechanism of ytterbium disilicate powders prepared by cocurrent chemical coprecipitation method

Ceramics international, 2022-04, Vol.48 (8), p.11545-11554

2022

Link zum Volltext

Verfügbarkeit prüfen

Electron-Beam and Plasma Oxidation-Resistant and Thermal-Barrier Coatings Deposited on Turbine Blades Using Cast and Powder Ni(Co)CrAlY(Si) Alloys Produced by Electron Beam Melting IV. Chemical and Phase Composition and Structure of Cocralysi Powder Alloys and Their Use

Powder metallurgy and metal ceramics, 2022-11, Vol.61 (7-8), p.459-464

2022

Link zum Volltext

Verfügbarkeit prüfen

Physical and Process Properties of Fine Gas-Atomized R6M5K5 Powders Produced in Different Conditions

Powder metallurgy and metal ceramics, 2023, Vol.61 (9-10), p.489-497

2023

Link zum Volltext

Verfügbarkeit prüfen

Comparative Study of Nickel-Based Super-Alloy Powders Atomized by Argon and Nitrogen

Powder metallurgy and metal ceramics, 2023-03, Vol.61 (11-12), p.633-643

2023

Link zum Volltext

Verfügbarkeit prüfen

Low‐temperature sintering of single‐phase, high‐entropy carbide ceramics

Journal of the American Ceramic Society, 2019-12, Vol.102 (12), p.7217-7224

2019

Link zum Volltext

Verfügbarkeit prüfen

Application of Cr3C2/C composite powders synthesized via molten-salt method in low-carbon MgO–C refractories

Ceramics international, 2022-06, Vol.48 (11), p.15227-15235

2022

Link zum Volltext

Verfügbarkeit prüfen

Highly Active Granular Nickel Powders for Multi-Batch Production of Spongy Oxide Cathodes

Powder metallurgy and metal ceramics, 2021-11, Vol.60 (7-8), p.396-402

2021

Link zum Volltext

Verfügbarkeit prüfen

Efficient synthesis of Ti3AlC2 powders with high purity by microwave-assisted molten salt method

Ceramics international, 2022-06, Vol.48 (11), p.16357-16363

2022

Link zum Volltext

Verfügbarkeit prüfen

Carbon‐containing droplet combustion–carbothermal synthesis of well‐distributed AlN nanometer powders

Journal of the American Ceramic Society, 2022-10, Vol.105 (10), p.5999-6006

2022

Link zum Volltext

Verfügbarkeit prüfen

Antioxidant properties of low-carbon magnesia-carbon refractories containing AlB2–Al–Al2O3 composites

Ceramics international, 2022-01, Vol.48 (1), p.1375-1381

2022

Link zum Volltext

Verfügbarkeit prüfen

The Effect of Morphology and Particle-Size Distribution of VT20 Titanium Alloy Powders on the Mechanical Properties of Deposited Coatings

Powder metallurgy and metal ceramics, 2019-03, Vol.57 (11-12), p.697-702

2019

Link zum Volltext

Verfügbarkeit prüfen

Pressureless sintering of transparent AlON ceramic with assimilable γ‐Al2O3 as sintering promoting additives

Journal of the American Ceramic Society, 2022-05, Vol.105 (5), p.3189-3196

2022

Link zum Volltext

Verfügbarkeit prüfen

Improved high-frequency magnetic properties of FeSiBCCr amorphous soft magnetic composites by adding carbonyl iron powders

Journal of non-crystalline solids, 2023-04, Vol.605, p.122166, Article 122166

2023

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 7.965

Suche als RSS-Feed

Aktive Filter

ThemaPhysical Sciences

SpracheEnglisch

ThemaMaterials Science, Ceramics

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(7.894)
Mit Volltextzugriff
(7.936)

Publikationsform

Sprache

1 weiteren anzeigen...

Weniger anzeigen...

Erscheinungsjahr

n.n

Thema

Materials Science
(7.914)
Science & Technology
(7.914)
Technology
(7.914)
Ceramics
(2.958)
Sintering
(2.581)
Exact Sciences And Technology
(1.893)
Powders
(1.874)
Glass
(1.662)
Composites
(1.632)
Natural Materials
(1.524)
Chemistry And Materials Science
(1.523)
Metallurgy & Metallurgical Engineering
(1.468)
Characterization And Evaluation Of Materials
(1.219)
Applied Sciences
(1.039)
Ceramics And Composites
(948)
Materials Chemistry
(933)
Powder Metallurgy
(928)
Chemistry
(912)
Chemical Industry And Chemicals
(889)

14 weitere anzeigen...

Weniger anzeigen...

Kollektion

Ingenta
(4.682)
Elsevier ScienceDirect Journals Complete
(2.736)
SpringerLink (Online service)
(2.316)
SpringerLINK Contemporary (Konsortium Baden-Württemberg)
(2.201)
Journals@Ovid Full Text
(2.194)
Wiley Online Library Journals
(1.881)
Wiley Online Library
(1.874)
Publisher website
(1.468)
EZB Electronic Journals Library
(709)
IngentaConnect Journals
(601)
Taylor & Francis Journals Complete
(144)
Taylor & Francis
(144)
Ebook Central Perpetual and DDA
(83)
Sage Journals
(78)
eBooks on EBSCOhost
(73)
Wiley Online Library All Obooks
(72)
ScienceDirect eBooks
(10)

12 weitere anzeigen...

Weniger anzeigen...

Zeitschrift / Serie

5 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

... seit 30 Tagen
(1)
... seit 90 Tagen
(21)

Menü

Weitere Dienste

Einstellungen

Requirements for Metal and Alloy Powders for 3D Printing (Review)

Rapidly fabricating Y2O3 transparent ceramics at low temperature by SPS with mesoporous powder

Enhancement of piezoelectric properties of BF–BT ceramics by using ZrO2 powder bed during the sintering process

Study of alumina ceramic parts fabricated via DLP stereolithography using powders with different sizes and morphologies

Microstructure and phase transformation behavior of Al2O3–ZrO2 under microwave sintering

Powder Compaction Dies and Compressibility of Various Materials

Process development for the laser powder bed fusion of WC‐Ni Cermets using sintered‐agglomerated powder

Manufacturing porous ceramic materials by tape casting—A review

Sintering behavior of bimodal iron nanopowder agglomerates

Clad TiCrC(Ni) Composite Powders for Thermal Spraying of Coatings

Compositional design of single-phase rare-earth based high-entropy oxides (HEOs) by using the cluster-plus-glue atom model

Features of the Sintering of Fe–Cu–Sn–Ni and Cu–Ti–Sn–Ni Powders during Hot Pressing

Structural evolution and synthesis mechanism of ytterbium disilicate powders prepared by cocurrent chemical coprecipitation method

Electron-Beam and Plasma Oxidation-Resistant and Thermal-Barrier Coatings Deposited on Turbine Blades Using Cast and Powder Ni(Co)CrAlY(Si) Alloys Produced by Electron Beam Melting IV. Chemical and Phase Composition and Structure of Cocralysi Powder Alloys and Their Use

Physical and Process Properties of Fine Gas-Atomized R6M5K5 Powders Produced in Different Conditions

Comparative Study of Nickel-Based Super-Alloy Powders Atomized by Argon and Nitrogen

Low‐temperature sintering of single‐phase, high‐entropy carbide ceramics

Application of Cr3C2/C composite powders synthesized via molten-salt method in low-carbon MgO–C refractories

Highly Active Granular Nickel Powders for Multi-Batch Production of Spongy Oxide Cathodes

Efficient synthesis of Ti3AlC2 powders with high purity by microwave-assisted molten salt method

Carbon‐containing droplet combustion–carbothermal synthesis of well‐distributed AlN nanometer powders

Antioxidant properties of low-carbon magnesia-carbon refractories containing AlB2–Al–Al2O3 composites

The Effect of Morphology and Particle-Size Distribution of VT20 Titanium Alloy Powders on the Mechanical Properties of Deposited Coatings

Pressureless sintering of transparent AlON ceramic with assimilable γ‐Al2O3 as sintering promoting additives

Improved high-frequency magnetic properties of FeSiBCCr amorphous soft magnetic composites by adding carbonyl iron powders

Aktive Filter

Suchergebnisse filtern