UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 2.512

Sortiert nach

Mechanisms for the Shape-Control and Shape-Evolution of Colloidal Semiconductor Nanocrystals

Advanced materials (Weinheim), 2003-03, Vol.15 (5), p.459-463

Peng, X.

2003

Link zum Volltext

Verfügbarkeit prüfen

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

Progress in materials science, 2015-06, Vol.71, p.93-168

2015

Link zum Volltext

Verfügbarkeit prüfen

Importance of balancing membrane and electrode water in anion exchange membrane fuel cells

Journal of power sources, 2018-01, Vol.375, p.205-213

2018

Link zum Volltext

Verfügbarkeit prüfen

Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells – A review

Journal of power sources, 2012-09, Vol.213, p.317-337

2012

Link zum Volltext

Verfügbarkeit prüfen

A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics

Composites. Part A, Applied science and manufacturing, 2005-06, Vol.36 (6), p.859-874

2005

Link zum Volltext

Verfügbarkeit prüfen

Finite element analysis of dynamic progressive failure of carbon fiber composite laminates under low velocity impact

Composite structures, 2016-08, Vol.149, p.408-422

2016

Link zum Volltext

Verfügbarkeit prüfen

Effect of Cr2O3 nanoparticle dispersions on oxidation kinetics and phase transformation of thermally grown alumina on a nickel aluminide coating

Corrosion science, 2019-04, Vol.150, p.91-99

2019

Link zum Volltext

Verfügbarkeit prüfen

Linear elastic fracture simulation directly from CAD: 2D NURBS-based implementation and role of tip enrichment

International journal of fracture, 2017-03, Vol.204 (1), p.55-78

2017

Link zum Volltext

Verfügbarkeit prüfen

Large-Scale Synthesis and Characterization of TiO2-Based Nanostructures on Ti Substrates

Advanced functional materials, 2006-07, Vol.16 (10), p.1355-1362

2006

Link zum Volltext

Verfügbarkeit prüfen

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results

Composites. Part A, Applied science and manufacturing, 2008-06, Vol.39 (6), p.1037-1053

2008

Link zum Volltext

Verfügbarkeit prüfen

Oxidation-resistant CoCrAl coatings fabricated by electrodeposition in combination with electrophoretic deposition

Surface & coatings technology, 2018-10, Vol.352, p.541-548

2018

Link zum Volltext

Verfügbarkeit prüfen

Correlations between the plastic instabilities occurring in indentation and the Portevin Le-Chatelier effect in uniaxial tension

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2022-09, Vol.854, p.143799, Article 143799

2022

Link zum Volltext

Verfügbarkeit prüfen

Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel

Journal of materials processing technology, 2021-02, Vol.288, p.116907, Article 116907

2021

Link zum Volltext

Verfügbarkeit prüfen

3D Printed Ion-Responsive Personalized Transdermal Patch

ACS applied materials & interfaces, 2024-03, Vol.16 (11), p.14113-14123

2024

Link zum Volltext

Verfügbarkeit prüfen

Accelerated phase transformation of thermally grown alumina on Ni2Al3: Effect of dispersion of hcp-oxides with various content and particle size and chemistry

Surface & coatings technology, 2020-07, Vol.394, p.125861, Article 125861

2020

Link zum Volltext

Verfügbarkeit prüfen

Persistent compositions of non-stoichiometric compounds with low bulk diffusivity: A theory and application to Nb3Sn superconductors

Journal of alloys and compounds, 2020-12, Vol.845 (C), p.156182, Article 156182

2020

Link zum Volltext

Verfügbarkeit prüfen

Thermal growth of exclusive alumina scale on a TiAl based alloy: Shot peening effect

Corrosion science, 2018-10, Vol.143, p.76-83

2018

Link zum Volltext

Verfügbarkeit prüfen

Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air

Acta materialia, 2005-11, Vol.53 (19), p.5079-5088

2005

Link zum Volltext

Verfügbarkeit prüfen

In situ (TiBw + TiCp)/Ti6Al4V composites with a network reinforcement distribution

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2010, Vol.527 (24), p.6723-6727

2010

Link zum Volltext

Verfügbarkeit prüfen

Evolution of the magnetic anisotropy and magnetostriction in Co-based amorphous alloys microwires due to current annealing and stress-sensory applications

Journal of alloys and compounds, 2020-10, Vol.837, p.155584, Article 155584

2020

Link zum Volltext

Verfügbarkeit prüfen

Effect of powder oxygen content on microstructure and mechanical properties of a laser additively-manufactured 12CrNi2 alloy steel

Materials letters, 2019-02, Vol.236, p.214-217

2019

Link zum Volltext

Verfügbarkeit prüfen

Molecular simulations of the influence of defects and functionalization on the shear strength of carbon nanotube-epoxy polymer interfaces

Computational materials science, 2017-01, Vol.126, p.204-216

2017

Link zum Volltext

Verfügbarkeit prüfen

Synergistic effects of microalloying and pre-straining on enhanced nanoprecipitation and creep property of alumina-forming austenitic stainless steels

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2022-11, Vol.857, p.143995, Article 143995

2022

Link zum Volltext

Verfügbarkeit prüfen

In situ (Al3Zr+Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

Journal of alloys and compounds, 2013-12, Vol.581, p.16-22

2013

Link zum Volltext

Verfügbarkeit prüfen

A micro-macro description for pseudoelasticity of NiTi SMAs subjected to nonproportional deformations

International journal of plasticity, 2017-03, Vol.90, p.44-65

2017

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 2.512

Suche als RSS-Feed

Aktive Filter

PublikationsformReviews

SpracheEnglisch

ThemaMaterials Science

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(2.341)
Mit Volltextzugriff
(2.469)

Publikationsform

1 weiteren anzeigen...

Weniger anzeigen...

Sprache

Erscheinungsjahr

n.n

Thema

Science & Technology
(2.416)
Technology
(2.325)
Materials Science, Multidisciplinary
(1.832)
Physical Sciences
(1.284)
Physics
(1.171)
Exact Sciences And Technology
(1.033)
Physics, Applied
(669)
Chemistry
(575)
Chemistry, Physical
(465)
Physics, Condensed Matter
(456)
Cross-Disciplinary Physics: Materials Science; Rheology
(448)
Metallurgy & Metallurgical Engineering
(427)
Applied Sciences
(422)
Science & Technology - Other Topics
(387)
Engineering
(359)
Nanoscience & Nanotechnology
(351)
Condensed Matter: Electronic Structure, Electrical, Magnetic, And Optical Properties
(271)
Condensed Matter: Structure, Mechanical And Thermal Properties
(219)
Materials Science, Coatings & Films
(187)

14 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

... seit 30 Tagen
(1)
... seit 90 Tagen
(4)

Menü

Weitere Dienste

Einstellungen

Mechanisms for the Shape-Control and Shape-Evolution of Colloidal Semiconductor Nanocrystals

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

Importance of balancing membrane and electrode water in anion exchange membrane fuel cells

Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells – A review

A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics

Finite element analysis of dynamic progressive failure of carbon fiber composite laminates under low velocity impact

Effect of Cr2O3 nanoparticle dispersions on oxidation kinetics and phase transformation of thermally grown alumina on a nickel aluminide coating

Linear elastic fracture simulation directly from CAD: 2D NURBS-based implementation and role of tip enrichment

Large-Scale Synthesis and Characterization of TiO2-Based Nanostructures on Ti Substrates

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results

Oxidation-resistant CoCrAl coatings fabricated by electrodeposition in combination with electrophoretic deposition

Correlations between the plastic instabilities occurring in indentation and the Portevin Le-Chatelier effect in uniaxial tension

Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel

3D Printed Ion-Responsive Personalized Transdermal Patch

Accelerated phase transformation of thermally grown alumina on Ni2Al3: Effect of dispersion of hcp-oxides with various content and particle size and chemistry

Persistent compositions of non-stoichiometric compounds with low bulk diffusivity: A theory and application to Nb3Sn superconductors

Thermal growth of exclusive alumina scale on a TiAl based alloy: Shot peening effect

Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air

In situ (TiBw + TiCp)/Ti6Al4V composites with a network reinforcement distribution

Evolution of the magnetic anisotropy and magnetostriction in Co-based amorphous alloys microwires due to current annealing and stress-sensory applications

Effect of powder oxygen content on microstructure and mechanical properties of a laser additively-manufactured 12CrNi2 alloy steel

Molecular simulations of the influence of defects and functionalization on the shear strength of carbon nanotube-epoxy polymer interfaces

Synergistic effects of microalloying and pre-straining on enhanced nanoprecipitation and creep property of alumina-forming austenitic stainless steels

In situ (Al3Zr+Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

A micro-macro description for pseudoelasticity of NiTi SMAs subjected to nonproportional deformations

Aktive Filter

Suchergebnisse filtern