UB Paderborn / Katalog / Suche / in CDI

Sortiert nach

Einfacher Volltextzugriff von (fast) überall

Installieren Sie die LibKey Nomad-Browsererweiterung und erhalten Sie von vielen Webseiten einfachen Zugriff auf lizenzierte Volltexte oder Open Access Publikationen. Mehr erfahren...

High-Temperature Corrosion Behavior of Fe-18Ni-12Cr-2.9Al and Fe-18Ni-12Cr-2.3Al-Nb-C Austenitic Steels Depending on Dissolved Oxygen Concentration in Static Liquid Pb at 700 °C

High temperature corrosion of materials, 2024-06, Vol.101 (3), p.589-602

2024

Volltextzugriff (PDF)

Compatibility of reduced activation ferritic martensitic steel JLF-1 with liquid metals Li and Pb–17Li

Fusion engineering and design, 2012-10, Vol.87 (10), p.1777-1787

2012

Volltextzugriff (PDF)

Investigation of microstructure and liquid lead corrosion behavior of a Fe-18Ni-16Cr-4Al base alumina-forming austenitic stainless steel

Materials research express, 2020-02, Vol.7 (2), p.26533

2020

Volltextzugriff (PDF)

Effect of nitrogen on the corrosion behavior of RAFM JLF-1 steel in lithium

Journal of nuclear materials, 2011-10, Vol.417 (1-3), p.1205-1209

2011

Volltextzugriff (PDF)

Corrosion of reduced activation ferritic martensitic steel JLF-1 in purified Flinak at static and flowing conditions

Fusion engineering and design, 2010-12, Vol.85 (7), p.1430-1436

2010

Volltextzugriff (PDF)

Mass transfer of RAFM steel in Li by simple immersion, impeller induced flow and thermal convection

Journal of nuclear materials, 2011-10, Vol.417 (1-3), p.1200-1204

2011

Volltextzugriff (PDF)

Structural and compositional transformations in the near-surface layers of Fe–Cr based steels exposed to lithium – Effect of alloying and corrosion-assisted substructure coarsening

Corrosion science, 2011, Vol.53 (1), p.441-447

2011

Volltextzugriff (PDF)

Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C

Corrosion science, 2021-08, Vol.189, p.109591, Article 109591

2021

Volltextzugriff (PDF)

Impact properties of electron beam welds of V–4Ti–4Cr alloys NIFS-HEAT-2 and CEA-J57

Fusion engineering and design, 2014-10, Vol.89 (7-8), p.1633-1636

2014

Volltextzugriff (PDF)

Electrochemical and metallographic characterization of Ni-NiO-NiBi3 equilibrium in molten lead-bismuth eutectic

Journal of nuclear materials, 2024-02, Vol.589, p.154866, Article 154866

2024

Volltextzugriff (PDF)

Flow accelerated corrosion and erosion–corrosion of RAFM steel in liquid breeders

Fusion engineering and design, 2011-10, Vol.86 (9), p.2500-2503

2011

Volltextzugriff (PDF)

Early stages of liquid-metal corrosion on pre-oxidized surfaces of austenitic stainless steel 316L exposed to static Pb-Bi eutectic at 400 °C

Corrosion science, 2024-02, Vol.227, p.111680, Article 111680

2024

Volltextzugriff (PDF)

Effect of variation in oxygen concentration in static Pb–Bi eutectic on long-term corrosion performance of Al-alloyed austenitic steels at 500 °C

Corrosion science, 2022-02, Vol.195, p.109963, Article 109963

2022

Volltextzugriff (PDF)

Morphological and compositional features of corrosion behavior of SUS410–SUS410, SUS316–SUS316 and SUS410–SUS316 TIG welded joints in Li

Fusion engineering and design, 2012-05, Vol.87 (4), p.363-368

2012

Volltextzugriff (PDF)

Oxygen-enhanced dissolution corrosion of austenitic stainless steel 316 L in static lead-bismuth eutectic at 500 °C

Corrosion science, 2024-08, Vol.236, p.112224, Article 112224

2024

Volltextzugriff (PDF)

Corrosion behavior and mechanical properties of V-4Cr-4Ti alloy exposed at 500 and 700 °C to static Pb with ∼10-9mass% dissolved oxygen for 1000 h

Journal of nuclear materials, 2024-07, Vol.595, p.155052, Article 155052

2024

Volltextzugriff (PDF)

Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 × 10−7 mass% dissolved oxygen

Corrosion science, 2020-09, Vol.174, p.108852, Article 108852

2020

Volltextzugriff (PDF)

Effect of Lithium Purity on In-Situ Formation of Er2O3 Oxide Layer on V-4Ti-4Cr Alloy

Plasma and Fusion Research, 2012/09/13, Vol.7, pp.2405123-2405123

2012

Volltextzugriff (PDF)

Corrosion behavior of Fe–14Cr–2W and Fe–9Cr–2W ODS steels in stagnant liquid Pb with different oxygen concentration at 550 and 650°C

Journal of nuclear materials, 2013-11, Vol.442 (1-3), p.434-443

2013

Volltextzugriff (PDF)

Steel T91 subjected to static stress in lead-bismuth eutectic at 450–550 °C and low oxygen concentration

Journal of nuclear materials, 2018-12, Vol.512, p.423-439

2018

Volltextzugriff (PDF)

Oxygen-driven de-alloying of Fe-14Cr-12Ni-10Mn-3Cu-2.5Al-1Nb austenitic steel at 500 °C in static Pb-Bi eutectic with concentration of dissolved oxygen alternating from ∼10-6 to 10-9 mass% for 10000 h

Corrosion communications, 2025-03, Vol.17, p.1-11

2025

Volltextzugriff (PDF)

Effect of Oxygen Concentration in Static Pb-Bi Eutectic on Corrosion Mode of Aluminum-Alloyed Austenitic Steels at 550 °C for 1000 h

Materials science forum, 2021-03, Vol.1024, p.79-85

2021

Volltextzugriff (PDF)

Aspects of corrosion of iron‐ and nickel‐based materials by liquid tin: Oxygen dissolved in the melt and saturation with the parent element

Materials and corrosion, 2018-07, Vol.69 (7), p.832-849

2018

Volltextzugriff (PDF)

Long-term corrosion of austenitic steels in flowing LBE at 400 °C and 10−7 mass% dissolved oxygen in comparison with 450 and 550 °C

Journal of nuclear materials, 2016-01, Vol.468, p.305-312

2016

Volltextzugriff (PDF)

Long-term corrosion of austenitic steels in flowing LBE at 400 degree C and 10 super(-7) mass% dissolved oxygen in comparison with 450 and 550 degree C

Journal of nuclear materials, 2016-01, Vol.468, p.305-312

2016

Volltextzugriff (PDF)

1 – 25 von 44

Suche als RSS-Feed

Aktive Filter

Zeitschrift / SerieJournal Of Nuclear Engineering And Radiation Science

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(40)
Mit Volltextzugriff
(41)

Publikationsform

Sprache

Englisch
(44)

Erscheinungsjahr

n.n

Neu hinzugefügt

... seit 7 Tagen
(1)

Menü

Weitere Dienste

Einstellungen

High-Temperature Corrosion Behavior of Fe-18Ni-12Cr-2.9Al and Fe-18Ni-12Cr-2.3Al-Nb-C Austenitic Steels Depending on Dissolved Oxygen Concentration in Static Liquid Pb at 700 °C

Compatibility of reduced activation ferritic martensitic steel JLF-1 with liquid metals Li and Pb–17Li

Investigation of microstructure and liquid lead corrosion behavior of a Fe-18Ni-16Cr-4Al base alumina-forming austenitic stainless steel

Effect of nitrogen on the corrosion behavior of RAFM JLF-1 steel in lithium

Corrosion of reduced activation ferritic martensitic steel JLF-1 in purified Flinak at static and flowing conditions

Mass transfer of RAFM steel in Li by simple immersion, impeller induced flow and thermal convection

Structural and compositional transformations in the near-surface layers of Fe–Cr based steels exposed to lithium – Effect of alloying and corrosion-assisted substructure coarsening

Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C

Impact properties of electron beam welds of V–4Ti–4Cr alloys NIFS-HEAT-2 and CEA-J57

Electrochemical and metallographic characterization of Ni-NiO-NiBi3 equilibrium in molten lead-bismuth eutectic

Flow accelerated corrosion and erosion–corrosion of RAFM steel in liquid breeders

Early stages of liquid-metal corrosion on pre-oxidized surfaces of austenitic stainless steel 316L exposed to static Pb-Bi eutectic at 400 °C

Effect of variation in oxygen concentration in static Pb–Bi eutectic on long-term corrosion performance of Al-alloyed austenitic steels at 500 °C

Morphological and compositional features of corrosion behavior of SUS410–SUS410, SUS316–SUS316 and SUS410–SUS316 TIG welded joints in Li

Oxygen-enhanced dissolution corrosion of austenitic stainless steel 316 L in static lead-bismuth eutectic at 500 °C

Corrosion behavior and mechanical properties of V-4Cr-4Ti alloy exposed at 500 and 700 °C to static Pb with ∼10-9mass% dissolved oxygen for 1000 h

Long-term corrosion performance of T91 ferritic/martensitic steel at 400 °C in flowing Pb-Bi eutectic with 2 × 10−7 mass% dissolved oxygen

Effect of Lithium Purity on In-Situ Formation of Er2O3 Oxide Layer on V-4Ti-4Cr Alloy

Corrosion behavior of Fe–14Cr–2W and Fe–9Cr–2W ODS steels in stagnant liquid Pb with different oxygen concentration at 550 and 650°C

Steel T91 subjected to static stress in lead-bismuth eutectic at 450–550 °C and low oxygen concentration

Oxygen-driven de-alloying of Fe-14Cr-12Ni-10Mn-3Cu-2.5Al-1Nb austenitic steel at 500 °C in static Pb-Bi eutectic with concentration of dissolved oxygen alternating from ∼10-6 to 10-9 mass% for 10000 h

Effect of Oxygen Concentration in Static Pb-Bi Eutectic on Corrosion Mode of Aluminum-Alloyed Austenitic Steels at 550 °C for 1000 h

Aspects of corrosion of iron‐ and nickel‐based materials by liquid tin: Oxygen dissolved in the melt and saturation with the parent element

Long-term corrosion of austenitic steels in flowing LBE at 400 °C and 10−7 mass% dissolved oxygen in comparison with 450 and 550 °C

Long-term corrosion of austenitic steels in flowing LBE at 400 degree C and 10 super(-7) mass% dissolved oxygen in comparison with 450 and 550 degree C

Aktive Filter

Suchergebnisse filtern