UB Paderborn / Katalog / Suche / in CDI

1 – 25 von 14.558

Sortiert nach

USP14 Inhibition Regulates Tumorigenesis by Inducing Autophagy in Lung Cancer In Vitro

International journal of molecular sciences, 2019-10, Vol.20 (21), p.5300

2019

Link zum Volltext

Verfügbarkeit prüfen

Development of Photo-Polymerization-Type 3D Printer for High-Viscosity Ceramic Resin Using CNN-Based Surface Defect Detection

Materials, 2023-06, Vol.16 (13), p.4734

2023

Link zum Volltext

Verfügbarkeit prüfen

Experimental and computational phase behavior investigation for the CO2 + 1H, 1H-perfluorooctyl acrylate and CO2 + 1H, 1H-perfluorooctyl methacrylate systems at high pressure

Arabian journal of chemistry, 2023-07, Vol.16 (7), p.104862, Article 104862

2023

Link zum Volltext

Verfügbarkeit prüfen

Development of multicolor 3D-printed 3Y-ZrO2 sintered bodies by optimizing rheological properties of UV-curable high-content ceramic nanocomposites

Materials & design, 2021-11, Vol.209, p.109981, Article 109981

2021

Link zum Volltext

Verfügbarkeit prüfen

Ultrafast carbothermal reduction of silica to silicon using a CO2 laser beam

Scientific reports, 2020-12, Vol.10 (1), p.21730-21730, Article 21730

2020

Link zum Volltext

Verfügbarkeit prüfen

Fabrication of 3D Printed Ceramic Part Using Photo-Polymerization Process

Polymers, 2023-03, Vol.15 (7), p.1601

2023

Link zum Volltext

Verfügbarkeit prüfen

Fabrication of a Conductive Pattern on a Photo-Polymerized Structure Using Direct Laser Sintering

Applied sciences, 2022-11, Vol.12 (21), p.11003

2022

Link zum Volltext

Verfügbarkeit prüfen

Fast Fabrication of Conductive Copper Structure on Glass Material Using Laser-Induced Chemical Liquid Phase Deposition

Applied sciences, 2021-09, Vol.11 (18), p.8695

2021

Link zum Volltext

Verfügbarkeit prüfen

Thermodynamic study for the (butyl, hexyl and octyl) acetoacetate under high pressure CO2

Arabian journal of chemistry, 2023-12, Vol.16 (12), p.105290, Article 105290

2023

Link zum Volltext

Verfügbarkeit prüfen

Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

Applied sciences, 2021-09, Vol.11 (18), p.8545

2021

Link zum Volltext

Verfügbarkeit prüfen

Improved electrical and thermo-mechanical properties of a MWCNT/In-Sn-Bi composite solder reflowing on a flexible PET substrate

Scientific reports, 2017-10, Vol.7 (1), p.13756-14, Article 13756

2017

Link zum Volltext

Verfügbarkeit prüfen

Impact of neonatal resuscitation changes on outcomes of very-low-birth-weight infants

Scientific reports, 2021-04, Vol.11 (1), p.9003-9003, Article 9003

2021

Link zum Volltext

Verfügbarkeit prüfen

Compact Asymmetrical Quasi-MMIC Doherty Power Amplifier

Journal of Electromagnetic Engineering and Science, 2023-07, Vol.23 (4), p.381-383

2023

Link zum Volltext

Verfügbarkeit prüfen

Prediction of Fault for Floating Photovoltaics via Mechanical Stress Evaluation of Wind Speed and Wave Height

IEEE access, 2024, Vol.12, p.70105-70116

2024

Link zum Volltext

Verfügbarkeit prüfen

Optimal birth weight and term mortality risk differ among different ethnic groups in the U.S

Scientific reports, 2019-02, Vol.9 (1), p.1651-1651, Article 1651

2019

Link zum Volltext

Verfügbarkeit prüfen

Health Risk Evaluation of Whole-body Vibration by ISO 2631-5 and ISO 2631-1 for Operators of Agricultural Tractors and Recreational Vehicles

Industrial Health, 2013, Vol.51(3), pp.364-370

2013

Link zum Volltext

Verfügbarkeit prüfen

Cancer Clinical Trial Enrollment: OK Doc, but What's in It for Me?

Journal of the National Comprehensive Cancer Network, 2019-11, Vol.17 (11), p.1404

Park, Henry Soo-Min

2019

Link zum Volltext

Verfügbarkeit prüfen

Texture Modification of 3D-Printed Maltitol Candy by Changing Internal Design

Applied sciences, 2022-04, Vol.12 (9), p.4189

2022

Link zum Volltext

Verfügbarkeit prüfen

Uniform line sources based on a holed cavity and a laser

Optical and quantum electronics, 2017-03, Vol.49 (3), p.1-9, Article 106

2017

Link zum Volltext

Verfügbarkeit prüfen

Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography

Materials & design, 2019-10, Vol.180, p.107960, Article 107960

2019

Link zum Volltext

Verfügbarkeit prüfen

Dye-adsorption properties of WO3 nanorods grown by citric acid assisted hydrothermal methods

Ceramics international, 2017-12, Vol.43 (18), p.17022-17025

2017

Link zum Volltext

Verfügbarkeit prüfen

The development of air-breathing proton exchange membrane fuel cell (PEMFC) with a cylindrical configuration

International journal of hydrogen energy, 2010-11, Vol.35 (21), p.11844-11854

2010

Link zum Volltext

Verfügbarkeit prüfen

Effects of Milling Duration on the Thermoelectric Properties of n-Type BI2TE2.7SE0.3

Archives of metallurgy and materials, 2019-01, Vol.64 (2), p.591-595

2019

Link zum Volltext

Verfügbarkeit prüfen

Early stage growth characteristics of Ag3Sn intermetallic compounds during solid–solid and solid–liquid reactions in the Ag–Sn interlayer system: Experiments and simulations

Journal of alloys and compounds, 2014-12, Vol.617, p.763-773

2014

Link zum Volltext

Verfügbarkeit prüfen

Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys

Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2021-08, Vol.822, p.141668, Article 141668

2021

Link zum Volltext

Verfügbarkeit prüfen

1 – 25 von 14.558

Suche als RSS-Feed

Aktive Filter

Zeitschrift / SerieGut And Liver

ThemaAdult

Suchergebnisse filtern

Filter anzeigen

Nur zeigen

Geprüft (Peer-Review)
(12.760)
Mit Volltextzugriff
(13.862)

Publikationsform

4 weitere anzeigen...

Weniger anzeigen...

Sprache

Englisch
(12.241)
Koreanisch
(2.247)
Japanisch
(1.283)
Deutsch
(11)
Französisch
(9)
Spanisch
(9)
Portugiesisch
(6)
Chinesisch
(3)
Polnisch
(3)
Russisch
(1)

5 weitere anzeigen...

Weniger anzeigen...

Erscheinungsjahr

n.n

Thema

Science & Technology
(8.263)
Life Sciences & Biomedicine
(5.678)
Humans
(2.616)
Physical Sciences
(1.739)
Technology
(1.712)
Male
(1.668)
Animals
(1.404)
Female
(1.400)
Chemistry
(1.120)
Materials Science
(957)
Middle Aged
(888)
Original
(854)
Science & Technology - Other Topics
(817)
Mice
(760)
Engineering
(734)
Aged
(719)
Physics
(705)
Materials Science, Multidisciplinary
(702)
Biological And Medical Sciences
(642)
Biochemistry & Molecular Biology
(611)

15 weitere anzeigen...

Weniger anzeigen...

Kollektion

Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals
(8.111)
IngentaConnect
(5.919)
MEDLINE
(3.912)
IngentaConnect Journals
(2.902)
ScienceDirect Journals (5 years ago - present)
(2.757)
Journals@Ovid Ovid Full Text
(2.520)
Springer Online Journals Complete
(1.707)
Single Journals
(1.601)
EZB-NALI5-00465 Elsevier Archive NL
(1.597)
Wiley Online Library All Journals
(1.496)
Wiley Online Library Full Collection 2018
(968)
EZB-NALI2-00462 Springer Archive NL
(668)
Nature Journals Online
(472)
IEEE Xplore
(458)
Taylor & Francis:Master (3349 titles)
(243)
Taylor & Francis Journals Auto-Holdings Collection
(237)
Taylor & Francis Current Content Access
(228)
Oxford Journals Current Collection
(195)
Oxford Journals 2020 Medicine
(130)
Nexis Uni
(130)

15 weitere anzeigen...

Weniger anzeigen...

Zeitschrift / Serie

5 weitere anzeigen...

Weniger anzeigen...

Neu hinzugefügt

Menü

Weitere Dienste

Einstellungen

USP14 Inhibition Regulates Tumorigenesis by Inducing Autophagy in Lung Cancer In Vitro

Development of Photo-Polymerization-Type 3D Printer for High-Viscosity Ceramic Resin Using CNN-Based Surface Defect Detection

Experimental and computational phase behavior investigation for the CO2 + 1H, 1H-perfluorooctyl acrylate and CO2 + 1H, 1H-perfluorooctyl methacrylate systems at high pressure

Development of multicolor 3D-printed 3Y-ZrO2 sintered bodies by optimizing rheological properties of UV-curable high-content ceramic nanocomposites

Ultrafast carbothermal reduction of silica to silicon using a CO2 laser beam

Fabrication of 3D Printed Ceramic Part Using Photo-Polymerization Process

Fabrication of a Conductive Pattern on a Photo-Polymerized Structure Using Direct Laser Sintering

Fast Fabrication of Conductive Copper Structure on Glass Material Using Laser-Induced Chemical Liquid Phase Deposition

Thermodynamic study for the (butyl, hexyl and octyl) acetoacetate under high pressure CO2

Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

Improved electrical and thermo-mechanical properties of a MWCNT/In-Sn-Bi composite solder reflowing on a flexible PET substrate

Impact of neonatal resuscitation changes on outcomes of very-low-birth-weight infants

Compact Asymmetrical Quasi-MMIC Doherty Power Amplifier

Prediction of Fault for Floating Photovoltaics via Mechanical Stress Evaluation of Wind Speed and Wave Height

Optimal birth weight and term mortality risk differ among different ethnic groups in the U.S

Health Risk Evaluation of Whole-body Vibration by ISO 2631-5 and ISO 2631-1 for Operators of Agricultural Tractors and Recreational Vehicles

Cancer Clinical Trial Enrollment: OK Doc, but What's in It for Me?

Texture Modification of 3D-Printed Maltitol Candy by Changing Internal Design

Uniform line sources based on a holed cavity and a laser

Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography

Dye-adsorption properties of WO3 nanorods grown by citric acid assisted hydrothermal methods

The development of air-breathing proton exchange membrane fuel cell (PEMFC) with a cylindrical configuration

Effects of Milling Duration on the Thermoelectric Properties of n-Type BI2TE2.7SE0.3

Early stage growth characteristics of Ag3Sn intermetallic compounds during solid–solid and solid–liquid reactions in the Ag–Sn interlayer system: Experiments and simulations

Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys

Aktive Filter

Suchergebnisse filtern