Details

Autor(en) / Beteiligte

• Liu, F
• Jin, Z M
• Grigoris, P
• Hirt, F
• Rieker, C

Titel

Contact mechanics of metal-on-metal hip implants employing a metallic cup with a UHMWPE backing

Ist Teil von

• Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine, 2003, Vol.217 (3), p.207-213

Ort / Verlag

London, England: SAGE Publications

Erscheinungsjahr

2003

Quelle

MEDLINE

Beschreibungen/Notizen

• Abstract The contact mechanics in metal-on-metal hip implants employing a cobalt chromium acetabular cup with an ultra-high molecular weight polyethylene (UHMWPE) backing were analysed in the present study using the finite element method. A general modelling methodology was developed to examine the effects of the interfacial boundary conditions between the UHMWPE backing and a titanium shell for cementless fixation, the coefficient of friction and the loading angle on the predicted contact pressure distribution at the articulating surfaces. It was found that the contact mechanics at the bearing surfaces were significantly affected by the UHMWPE backing. Consequently, a relatively constant pressure distribution was predicted within the contact conjunction, and the maximum contact pressure occurred towards the edge of the contact. On the other hand, the interfacial boundary condition between the UHMWPE backing and the titanium shell, the coefficient of friction and the loading angle were found to have a negligible effect on the contact mechanics at the bearing surfaces. Overall, the magnitude of the contact pressure was significantly reduced, compared with a similar cup without the UHMWPE backing. The importance of the UHMWPE backing on the tribological performance of metal-on-metal hip implants is discussed.