Details

Autor(en) / Beteiligte

• Zhang, Shi C.
• Hilmas, Greg E.
• Fahrenholtz, William G.

Titel

Pressureless Sintering of ZrB2-SiC Ceramics

Ist Teil von

• Journal of the American Ceramic Society, 2008-01, Vol.91 (1), p.26-32

Ort / Verlag

Malden, USA: Blackwell Publishing Inc

Erscheinungsjahr

2008

Quelle

Wiley-Blackwell Journals

Beschreibungen/Notizen

• A pressureless sintering process was developed for the densification of zirconium diboride ceramics containing 10–30 vol% silicon carbide particles. Initially, boron carbide was evaluated as a sintering aid. However, the formation of a borosilicate glass led to significant coarsening, which inhibited densification. Based on thermodynamic calculations, a combination of carbon and boron carbide was added, which enabled densification (relative density >98%) by solid‐state sintering at temperatures as low as 1950°C. Varying the size of the starting silicon carbide particles allowed the final silicon carbide particle morphology to be controlled from equiaxed to whisker‐like. The mechanical properties of sintered ceramics were comparable with hot‐pressed materials with Vickers hardness of 22 GPa, elastic modulus of 460 GPa, and fracture toughness of ∼4 MPa·m1/2. Flexure strength was ∼460 MPa, which is at the low end of the range reported for similar materials, due to the relatively large size (∼13 μm long) of the silicon carbide inclusions.