Details

Autor(en) / Beteiligte

• Gulyurtlu, I.
• Crujeira, A.T.
• Abelha, P.
• Cabrita, I.

Titel

Measurements of dioxin emissions during co-firing in a fluidised bed

Ist Teil von

• Fuel (Guildford), 2007-09, Vol.86 (14), p.2090-2100

Ort / Verlag

Oxford: Elsevier Ltd

Erscheinungsjahr

2007

Quelle

Access via ScienceDirect (Elsevier)

Beschreibungen/Notizen

• The emissions of dioxins could be considerable when fuels with high chlorine content are used, particularly in fluidised beds due to constraints to use temperatures in the range 800–900 °C for other considerations. However, mixing of fuels with different characteristics may lead to a reduction in dioxin emissions. Studies are currently being undertaken at the above-mentioned department in mixing fuels of varying chlorine and sulphur contents to monitor the emissions of dioxins both in the gas and solid phases. Furthermore, the influence of certain elements like Cu in the ash in the emissions of dioxins is also studied to verify the catalytic effect. The INETI pilot-scale test facility is used for the combustion work. Two different coals, namely Colombian and Polish, are used as the base fuel. The supplementary fuels for co-firing include MBM and straw pellets. The combustion temperature is maintained at about 800–830 °C range without any limestone addition. The residence time of over 2 s is respected. Results obtained by far suggest that the presence of sulphur in both fuels have a very strong effect on the eventual emissions of dioxins and the synergy regarding to reduce the dioxins below the levels permitted is possible by mixing fuels based on their characteristics. The paper reports the results obtained and evaluates the effect of fuel nature and operating conditions on the emissions of dioxins.