Details

Autor(en) / Beteiligte

• Doceul, L.
• Bucalossi, J.
• Dougnac, H.
• Ferlay, F.
• Gargiulo, L.
• Keller, D.
• Larroque, S.
• Lipa, M.
• Pilia, A.
• Portafaix, C.
• Saille, A.
• Salami, M.
• Samaille, F.
• Soler, B.
• Thouvenin, D.
• Verger, J.M.
• Zago, B.

Titel

Design and test program of a simplified divertor dummy coil structure for the WEST project

Ist Teil von

• Fusion engineering and design, 2013-12, Vol.88 (12), p.3165-3168

Ort / Verlag

Elsevier B.V

Erscheinungsjahr

2013

Quelle

Access via ScienceDirect (Elsevier)

Beschreibungen/Notizen

• •The mechanical design and integration of the divertor structure has been performed.•The design of the casing and the winding-pack has been finalized.•The coil assembly process has been validated.•The realization of a coil mock-up scale one is in progress. In order to fully validate actively cooled tungsten plasma facing components (industrial fabrication, operation with long plasma duration), the implementation of a tungsten axisymmetric divertor structure in the tokamak Tore-Supra is studied. With this major upgrade, so-called WEST (Tungsten Environment in Steady state Tokamak), Tore-Supra will be able to address the problematic of long plasma discharges with a metallic divertor target. To do so, it is planned to install two symmetric divertor coils inside the vacuum vessel. This assembly, called divertor structure, is made up of two stainless steel casings containing a copper winding pack cooled by a pressurized hot water circuit (up to 180°C, 4MPa) and is designed to perform steady state plasma operation (up to 1000s). The divertor structure will be a complex assembly ring of 4m diameter representing a total weight of around 20tons. The technical challenge of this component will be the implementation of angular sectors inside the vacuum vessel environment (TIG welding of the coil casing, induction brazing and electrical insulation of the copper winding). Moreover, this complex assembly must sustain harsh environmental conditions in terms of ultra high vacuum conditions, electromagnetical loads and electrical isolation (13kV ground voltage) under high temperature. In order to fully validate the assembly and the performance of this complex component, the production of a scale one dummy coil is in progress. The paper will illustrate, the technical developments performed in order to finalize the design for the call for tender for fabrication. The progress and the first results of the simplified dummy coils will be also addressed.