Details

Autor(en) / Beteiligte

• Bassli, Amine
• Blin, Stephane
• Nouvel, Philippe
• Myara, Mikhael
• Roux, Jean-Francois
• Benbassou, Ali
• Belkadid, Jamal
• Penarier, Annick

Titel

3-D Imaging of Materials at 0.1 THz for Inner- Defect Detection Using a Frequency-Modulated Continuous-Wave Radar

Ist Teil von

• IEEE transactions on instrumentation and measurement, 2020-08, Vol.69 (8), p.5843-5852

Ort / Verlag

New York: IEEE

Erscheinungsjahr

2020

Quelle

IEEE/IET Electronic Library (IEL)

Beschreibungen/Notizen

• This article reports a novel 3-D imaging approach for remote, nondestructive material inspection at depth. The approach is based on a frequency-modulated continuous-wave (FMCW) radar system operating in the 75-110-GHz frequency band. Time-domain spectroscopy (TDS) measurements demonstrate that such a frequency band has manage-able attenuation levels in centimeter-long materials, thereby offering an advantageous resolution-versus-measurement-depth tradeoff compared with higher frequencies. The proposed setup includes a long delay on the reference signal in order to cancel redundant signals that would otherwise degrade the measurement. Furthermore, specific signal-processing techniques used to improve the performance of the system, which requires stringent component performances in terms of radio-frequency nonlinearity and return loss, are presented. Radio-frequency nonlinearity correction is based on a reference measurement, and the impact of deleterious reflections is reduced by averaging measurements conducted on a target at different longitudinal positions. As a result, an improvement of the signal-to-noise (S/N) ratio up to 20 dB is demonstrated. Tomography experiments were conducted on building materials showing 3-D imaging with theoretically limited longitudinal and transverse resolutions of 5 and 20 mm, respectively, thus opening the door to civil infrastructure monitoring applications.