Sie befinden Sich nicht im Netzwerk der Universität Paderborn. Der Zugriff auf elektronische Ressourcen ist gegebenenfalls nur via VPN oder Shibboleth (DFN-AAI) möglich. mehr Informationen...
Mode I crack propagation process of concrete under relatively low loading rates which cover four orders of magnitude (0.2 μm/s to 2.0 mm/s) is investigated with three‐point bending (TPB) beams. All measured material properties exhibit rate sensitivity and follow a log‐linear relationship with the loading rate. A rate‐sensitive softening curve is established. The complete load‐crack mouth opening displacement (P‐CMOD) curve, crack propagation length, and fracture process zone (FPZ) length are simulated based on crack growth criterion with the fitted material parameters under those loading rates. Results show that the simulated P‐CMOD curves agree well with those of experimental measurements. It is clear that the peak load increases with the loading rate and so is the critical crack mouth opening displacement. Moreover, under the same load level, the length of the FPZ and the cohesive stress at the initial crack tip also increase with the increasing loading rate.