Details

Autor(en) / Beteiligte

• Bao, Wei
• Jiang, Jin
• Yu, Zhiwei
• Zhou, Xiangqian

Titel

Mechanical behavior of high-strength bolts in T-stubs based on moment distribution

Ist Teil von

• Engineering structures, 2019-10, Vol.196, p.109334, Article 109334

Ort / Verlag

Kidlington: Elsevier Ltd

Erscheinungsjahr

2019

Quelle

Alma/SFX Local Collection

Beschreibungen/Notizen

• •The bending moment in tensile bolt attached to T-stub should be considered in design.•Three key factors were suggested and discussed for the bolt stress calculations.•New T-stub connector model and calculation method were proposed. A T-stub is a component comprising a T-section with two bolts attached to its flange. It can be used to analyze the mechanical behavior of high-strength bolts in tension. In this study, the mechanical behavior of bolts was assessed via six static tests and 17 finite element analysis models. The effects of the thickness of the flange, the length of the inner and outer flange, and the diameter of the bolt were studied. With the exception of outer flange length, the parameters significantly affected the bolt bending moment, yielding load, and T-stub failure mode. Both the tests and the finite element analyses indicated that when the bolts yielded, the bending stress could reach 13% to 45% of the total tensile stress in the samples. It is not advisable to design bolts without considering the effect of the bending moment. A stable bending moment distribution relationship was also found between the bolt and the outer flange. The bending moment of the joint, the bending moment ratio of the bolt to the joint, and the distance from the contact force center to the bolt center are also discussed. Lastly, a new T-stub connector model and calculation method were proposed and proven to be reliable. This method is based on the theory of moment distribution and does not require the prying force to be calculated.