Details

Autor(en) / Beteiligte

• Moewis, Philippe
• Checa, Sara
• Kutzner, Ines
• Hommel, Hagen
• Duda, Georg N
• Williams, John Leicester

Titel

Physiological joint line total knee arthroplasty designs are especially sensitive to rotational placement - A finite element analysis

Ist Teil von

• PloS one, 2018-02, Vol.13 (2), p.e0192225-e0192225

Ort / Verlag

United States: Public Library of Science

Erscheinungsjahr

2018

Link zum Volltext

Quelle

EZB Electronic Journals Library

Beschreibungen/Notizen

• Mechanical and kinematical aligning techniques are the usual positioning methods during total knee arthroplasty. However, alteration of the physiological joint line and unbalanced medio-lateral load distribution are considered disadvantages in the mechanical and kinematical techniques, respectively. The aim of this study was to analyse the influence of the joint line on the strain and stress distributions in an implanted knee and their sensitivity to rotational mal-alignment. Finite element calculations were conducted to analyse the stresses in the PE-Inlay and the mechanical strains at the bone side of the tibia component-tibia bone interface during normal positioning of the components and internal and external mal-rotation of the tibial component. Two designs were included, a horizontal and a physiological implant. The loading conditions are based on internal knee joint loads during walking. A medialization of the stresses on the PE-Inlay was observed in the physiological implant in a normal position, accompanied by higher stresses in the mal-rotated positions. Within the tibia component-tibia bone interface, similar strain distributions were observed in both implant geometries in the normal position. However, a medialization of the strains was observed in the physiological implant in both mal-rotated conditions with greater bone volume affected by higher strains. Although evident changes due to mal-rotation were observed, the stresses do not suggest a local plastic deformation of the PE-Inlay. The strains values within most of the tibia component-tibia bone interface were in the physiological strain zone and no significant bone changes would be expected. The physiological cut on the articular aspect showed no detrimental effect compared to the horizontal implant.