Details

Autor(en) / Beteiligte

• Ramachandran, Ashwin
• Hawks, Steven A.
• Stadermann, Michael
• Santiago, Juan G.

Titel

Frequency analysis and resonant operation for efficient capacitive deionization

Ist Teil von

• Water research (Oxford), 2018-11, Vol.144 (C), p.581-591

Ort / Verlag

England: Elsevier Ltd

Erscheinungsjahr

2018

Link zum Volltext

Quelle

MEDLINE

Beschreibungen/Notizen

• Capacitive deionization (CDI) performance metrics can vary widely with operating methods. Conventional CDI operating methods such as constant current and constant voltage show advantages in either energy or salt removal performance, but not both. We here develop a theory around and experimentally demonstrate a new operation for CDI that uses sinusoidal forcing voltage (or sinusoidal current). We use a dynamic system modeling approach, and quantify the frequency response (amplitude and phase) of CDI effluent concentration. Using a wide range of operating conditions, we demonstrate that CDI can be modeled as a linear time invariant system. We validate this model with experiments, and show that a sinusoid voltage operation can simultaneously achieve high salt removal and strong energy performance, thus very likely making it superior to other conventional operating methods. Based on the underlying coupled phenomena of electrical charge (and ionic) transfer with bulk advection in CDI, we derive and validate experimentally the concept of using sinusoidal voltage forcing functions to achieve resonance-type operation for CDI. Despite the complexities of the system, we find a simple relation for the resonant time scale: the resonant time period (frequency) is proportional (inversely proportional) to the geometric mean of the flow residence time and the electrical (RC) charging time. Operation at resonance implies the optimal balance between absolute amount of salt removed (in moles) and dilution (depending on the feed volume processed), thus resulting in the maximum average concentration reduction for the desalinated water. We further develop our model to generalize the resonant time-scale operation, and provide responses for square and triangular voltage waveforms as two examples. To this end, we develop a general tool that uses Fourier analysis to construct CDI effluent dynamics for arbitrary input waveforms. Using this tool, we show that most of the salt removal (∼95%) for square and triangular voltage forcing waveforms is achieved by the fundamental Fourier (sinusoidal) mode. The frequency of higher Fourier modes precludes high flow efficiency for these modes, so these modes consume additional energy for minimal additional salt removed. This deficiency of higher frequency modes further highlights the advantage of DC-offset sinusoidal forcing for CDI operation. [Display omitted] •Developed a dynamic system modeling approach for capacitive deionization (CDI).•CDI behaves as a first order linear time invariant system for practical conditions.•Demonstrated sinusoidal voltage/current operation for CDI as an efficient operation.•Identified a system “resonant” frequency that maximizes concentration reduction.•Developed a tool for CDI to predict effluent dynamics for arbitrary forcing input.