Details

Autor(en) / Beteiligte

• Belardinelli, Pierpaolo
• N F D Souza, Savio
• Verlinden, Eleonoor
• Wei, Jia
• Staufer, Urs
• Alijani, Farbod
• Ghatkesar, Murali K

Titel

Second flexural and torsional modes of vibration in suspended microfluidic resonator for liquid density measurements

Ist Teil von

• Journal of micromechanics and microengineering, 2020-05, Vol.30 (5), p.55003

Ort / Verlag

IOP Publishing

Erscheinungsjahr

2020

Quelle

Alma/SFX Local Collection

Beschreibungen/Notizen

• Suspended microfluidic resonators enable detection of fluid density and viscosity with high sensitivity. Here, a two-legged suspended microchannel resonator that probes pico-litres of liquid is presented. The higher resonant modes (flexural and torsional) were explored for increased sensitivity and resolution. Unlike other reported microchannel resonators, this device showed an increase in the quality factor with resonant frequency value. The performance of the resonator was tested by filling the channel with three liquids, one at a time, over a density range of 779−1110 kg m−3 and a viscosity range of 0.89−16.2 mPa s. The highest resolution obtained was 0.011% change in density. Measurements with torsional mode showed an improvement of about six times in sensitivity and about fifteen times in resolution compared to the first flexural mode. When the empty channel was filled with liquids of different viscosity, the quality factor of the first flexural mode remained overall constant with a variation below 3.3% between the fluids, and confirming the inherent property of suspended microchannel resonators. However, it significantly decreased for second flexural and torsional modes. No noticeable difference was observed in the quality factor between different liquid viscosities for all modes.