Details

Autor(en) / Beteiligte

• Xiu-juan Chen
• Wei-jiang Chen
• Zi-ming He
• Hai-Bin Shen

Titel

Overvoltage control strategy and techniques of the UHV controllable metal oxide surge arrester

Ist Teil von

• 2014 International Conference on Power System Technology, 2014, p.2322-2326

Ort / Verlag

IEEE

Erscheinungsjahr

2014

Quelle

IEL

Beschreibungen/Notizen

• According to mitigation effect of the controllable metal oxide surge arrester (CMOA) on switching overvoltage and absorbing energy of the CMOA components, the main parameters, suach as system threshold voltage at thyristor triggering moment U so , and controllable ratio α, were specified. The control strategy of the CMOA for switching overvoltage was then drawn up. Due to the special characteristic of operating conditions of COMA thyristor valve, a new control and measuring technique was put forward. The influencing factors on the accuracy of the technique were analyzed. It indicates that breakdown voltage deviation of breakdown diode and voltage sharing rate deviation of thyristor valve are two main factors affecting control accuracy of CMOA. However, errors could be controlled within the allowable range. In order to testify the control and measuring technique, an 110kV CMOA was manufactured, which was used to testify its operation characteristic. And its response properties on impulse current and voltage were tested and discussed. It is shown that thyristor valve could operate at the set threshold value. After the valve was closed, its residual voltage reduced to 0 straightly, and residual voltage of CMOA had a reduction of 25%. Turn-on relay time of thyristor valve was 3.0μs, less than the set value. Hence the control strategy and techniques of CMOA was realized correctly.