Details

Autor(en) / Beteiligte

• Nicolas, V.
• Sdanghi, G.
• Mozet, K.
• Schaefer, S.
• Maranzana, G.
• Celzard, A.
• Fierro, V.

Titel

Numerical simulation of a thermally driven hydrogen compressor as a performance optimization tool

Ist Teil von

• Applied energy, 2022-10, Vol.323, p.119628, Article 119628

Ort / Verlag

Elsevier Ltd

Erscheinungsjahr

2022

Quelle

Alma/SFX Local Collection

Beschreibungen/Notizen

• •A new thermally driven hydrogen compressor is successfully modeled.•The model is validated by using three heating powers:100 W, 200 W and 300 W.•The more the power is increased, the more hydrogen is discharged.•The amount of hydrogen discharged varies linearly with the final set temperature.•Increasing the heat transfer by convection reduces the heating time by 75%. For the first time, a thermal study and optimization of a thermally driven hydrogen compressor has been performed. Experiments on this compressor, which is a proof of concept we developed, are time-consuming, making it difficult to know the behavior of the compressor under a variety of possible thermal conditions. In order to understand its behavior, we developed a numerical model to study the evolution of hydrogen pressure, flow rate, and temperature when heat transfers are intensified by changing the heating power, the setpoint temperature, or the convective regime. Hydrogen compression and discharge were simulated by finite elements and the tank was modeled by an axisymmetric 2D geometry. The heat and mass conservation equations for hydrogen were solved and the predictions were validated by using three heating powers during desorption: 100 W, 200 W and 300 W. A parametric numerical study on the effect of heating power and final set temperature showed that the higher the power, the more hydrogen is discharged, and that the amount of hydrogen discharged varies quasi-linearly with the final set temperature, as long as it is below 500 K. Finally, we have shown that increasing the heat transfer by convection with the outside air reduces the time to reach the room temperature by approximately 75%.