Details

Autor(en) / Beteiligte

• Zhao, Xueyang
• Zheng, Haiyan
• Ma, Xin
• Sheng, Yinying
• Zeng, Dahai
• Yuan, Junping

Titel

Microstructure, Mechanical Properties, and Corrosion Resistance of Ag–Cu Alloys with La[sub.2]O[sub.3] Fabricated by Selective Laser Melting

Ist Teil von

• Materials, 2023-12, Vol.16 (24)

Ort / Verlag

MDPI AG

Erscheinungsjahr

2023

Quelle

EZB Free E-Journals

Beschreibungen/Notizen

• Ag and its alloys, when prepared by a selective laser melting (SLM) process, have a low density and poor overall performance due to their high reflectivity when the most commonly used laser (λ = 1060 nm) is used, and they have exorbitant thermal conductivity. These characteristics lead to the insufficient melting of the powders and severely limit the applications of additive manufactured silver alloys. To improve the absorption of the laser, as well as for better mechanical properties and higher resistance to sulfidation, Ag–Cu alloys with different La[sub.2]O[sub.3] contents were prepared in this work using the SLM process, via the mechanical mixing of La[sub.2]O[sub.3] nanoparticles with Ag–Cu alloy powders. A series of analyses and tests were conducted to study the effects of La[sub.2]O[sub.3] in Ag–Cu alloys on their density, microstructure, mechanical properties, and corrosion resistance. The results revealed that the addition of La[sub.2]O[sub.3] particles to Ag–Cu alloy powders improved the laser absorptivity and reduced defects during the SLM process, leading to a significant rise from 7.76 g/cm[sup.3] to 9.16 g/cm[sup.3] in the density of the Ag–Cu alloys. The phase composition of the Ag–Cu alloys prepared by SLM was Silver-3C. La[sub.2]O[sub.3] addition had no influence on the phase composition, but refined the grains of the Ag–Cu alloys by inhibiting the growth of columnar grains during the SLM process. No remarkable preferred orientation existed in all the samples prepared with or without La[sub.2]O[sub.3]. An upwards trend was achieved in the hardness of the Ag–Cu alloy by increasing the contents of La[sub.2]O[sub.3] from 0 to 1.2%, and the average hardness was enhanced significantly, from 0.97 GPa to 2.88 GPa when the alloy contained 1.2% La[sub.2]O[sub.3] due to the reduced pore defects and the refined grains resulting from the effects of the La[sub.2]O[sub.3]. EIS and PD tests of the samples in 1% Na[sub.2]S solution proved that La[sub.2]O[sub.3] addition improved the corrosion resistance of the Ag–Cu alloys practically and efficaciously. The samples containing La[sub.2]O[sub.3] exhibited higher impedance values and lower corrosion current densities.