Details

Autor(en) / Beteiligte

• Zhengzheng, Cao
• Xiangqian, Yang
• Zhenhua, Li
• Cunhan, Huang
• Feng, Du
• Wenqiang, Wang
• Xianjie, Ni
• Shuai, Liu
• Zhen, Li

Titel

Fracture propagation and pore pressure evolution characteristics induced by hydraulic and pneumatic fracturing of coal

Ist Teil von

• Scientific reports, 2024-05, Vol.14 (1), p.9992-9992

Ort / Verlag

England: Nature Publishing Group

Erscheinungsjahr

2024

Link zum Volltext

Quelle

EZB Electronic Journals Library

Beschreibungen/Notizen

• A two-dimensional unsteady seepage model for coal using a finite element program is developed, and the temporal variations of key factors such as water pressure and hydraulic gradient are analyzed in this paper. Additionally, the triaxial rock mechanical experiment and utilized pneumatic fracturing equipment on raw coal samples to investigate both hydraulic and pneumatic fracturing processes are conducted. Through these experiments, the relationship between pressure and crack formation and expansion are examined. The analysis reveals that the pore pressure gradient at the coal inlet reaches its peak during rapid surges in water pressure but diminishes over time. Conversely, the pore pressure gradient at the outlet side exhibits a gradual increase. Hydraulic fracturing is most likely to occur at the water inlet during sudden increases in water pressure. Besides, as the permeability of coal decreases, the duration for seepage stabilization prolongs due to the intensified pore pressure gradient resulting from sudden increases in water pressure. Moreover, an extended period of high hydraulic gradient further increases the risk of hydraulic fracturing. The experimental findings indicate that coal samples initially experience tensile failure influenced by water and air pressure. Subsequently, mode I cracks form under pressure, propagating along the fracture surface and becoming visible. The main types of failure observed in hydraulic and pneumatic fracturing are diametrical tensile failure, and the development of fractures can be categorized into three distinct stages, which contains the initial stage characterized by slight volume changes while water pressure increases, the expansion stage when pressure reaches the failure strength, and the crack closure stage marked by little or even decreasing volume changes during pressure unloading. The acoustic emission signal accurately corresponds to these three stages.