Details

Autor(en) / Beteiligte

• Nguyen, Thanh-Trung
• Vu, Thanh-Tung
• Nguyen, Thanh-Dong
• Vu, Toan-Thang

Titel

Axial Error of Spindle Measurements Using a High-Frequency-Modulated Interferometer

Ist Teil von

• Crystals (Basel), 2021-07, Vol.11 (7), p.801

Ort / Verlag

Basel: MDPI AG

Erscheinungsjahr

2021

Quelle

EZB Free E-Journals

Beschreibungen/Notizen

• In this paper, a novel, compact, and high-precision axial error measurement using a frequency-modulated interferometer is developed. Normally, heterodyne interferometers are a powerful system for small displacement measurements due to their property of being less sensitive to temperature and pressure variations. However, the maximum measurement speed of the heterodyne interferometer is around 5 m/s because it is usually limited by the difference in frequency between the two components of the laser beam, which is no larger than 3 MHz or 20 MHz corresponding laser source based on the Zeeman effect and acousto-optic modulator, respectively. The proposed measuring system is realized by modulating the frequency of the laser diode source at a high modulation frequency and using lock-in amplifiers to extract the harmonics of the interference signal. The measurement speed is proportional to the modulation frequency. Thus, the higher the modulation frequency, the higher the measuring speed attains. The frequency-modulated interferometer is then applied to measure the axial error of an ultra-precision spindle. The proposed system can be a capable solution for noncontact and high-precision spindle error measurements in the machining process.