Sie befinden Sich nicht im Netzwerk der Universität Paderborn. Der Zugriff auf elektronische Ressourcen ist gegebenenfalls nur via VPN oder Shibboleth (DFN-AAI) möglich. mehr Informationen...
Coal Seam Gas Extraction by Integrated Drillings and Punchings from the Floor Roadway considering Hydraulic-Mechanical Coupling Effect
Ist Teil von
Geofluids, 2022-01, Vol.2022, p.1-10
Ort / Verlag
Chichester: Hindawi
Erscheinungsjahr
2022
Quelle
EZB Electronic Journals Library
Beschreibungen/Notizen
Owing to the exhaustion of shallow coal resources, deep mining has been occupied in coal mines. Deep buried coal seams are featured by the great ground stress, high gas pressure, and low permeability, which boost the risk of gas disasters and thus dramatically threaten the security about coal mines. Coal seam gas pressure and gas content can be decreased by gas extraction, which is the primary measure to prevent and control mine gas disasters. The coal mass is simplified into a continuous medium with dual structure of pores and fractures and single permeability. In consideration of the combined effects of gas slippage and two-phase flow, a hydraulic-mechanical coupling model for gas migration in coals is proposed. This model involves the equations of gas sorption and diffusion, gas and water seepage, coal deformation, and evolution of porosity and permeability. Based on these, the procedure of gas extraction through the floor roadway combined with hydraulic punching and ordinary drainage holes was simulated, and the gas extraction results were used to evaluate the outburst danger of roadway excavation and to verify the engineering practice. Results show that gas extraction can reduce coal seam gas pressure and slow down the rate of gas release, and the established hydraulic-mechanical coupling model can accurately reveal the law of gas extraction by drilling and punching boreholes. After adopting the gas extraction technology of drilling and hydraulic punching from the floor roadway, the remaining gas pressure and gas content are reduced to lower than 0.5 MPa and 5.68 m3/t, respectively. The achievements set a theoretical foundation to the application of drilling and punching integrated technology to enhance gas extraction.