Details

Autor(en) / Beteiligte

• Lombardi, A.
• Ravindran, C.
• MacKay, R.

Titel

Application of the Billet Casting Method to Determine the Onset of Incipient Melting of 319 Al Alloy Engine Blocks

Ist Teil von

• Journal of materials engineering and performance, 2015-06, Vol.24 (6), p.2179-2184

Ort / Verlag

New York: Springer US

Erscheinungsjahr

2015

Quelle

2022 ECC(Springer)

Beschreibungen/Notizen

• The increased use of Al for automotive applications has resulted from the need to improve vehicle fuel efficiency. Aluminum alloy engine blocks fulfil the need of lightweighting. However, there are many challenges associated with thermo-mechanical mismatch between Al and the gray cast iron cylinder liners, which result in large tensile residual stress along the cylinder bores. This requires improced mechanical properties in this region to prevent premature engine failure. In this study, replicating billet castings were used to simulate the engine block solution heat treatment process and determine the onset of incipient melting. Microstructural changes during heat treatment were assessed with SEM and EDX, while thermal analysis was carried out using differential scanning calorimetry. The results suggest that solution heat treatment at 500 °C was effective in dissolving secondary phase particles, while solutionizing at 515 or 530 °C caused incipient melting of Al 2 Cu and Al 5 Mg 8 Cu 2 Si 6 . Incipient melting caused the formation ultra-fine eutectic clusters consisting of Al, Al 2 Cu, and Al 5 Mg 8 Cu 2 Si 6 on quenching. In addition, DSC analysis found that incipient melting initiated at 507 °C for all billets, although the quantity of local melting reduced with microstructural refinement as evidenced by smaller endothermic peaks and energy absorption. The results from this study will assist in improving engine block casting integrity and process efficiency.